Sound Performance Lab 2269 owner manual Return Channels 5 to, Stereo Outputs, Phones OUT

Rear Panel/Connections

RETURN CHANNELS 5 TO 8

These connectors provide the balanced RETURN signal from stereo channels 5 to 8 for connection to processor outputs. The numbers on the cables corre- spond to the Router channels as follows:

Cable No. Return Channel Switch Position

1	Return 5 Left
2	Return 5 Right
3	Return 6 Left
4	Return 6 Right
5	Return 7 Left
6	Return 7 Right
7	Return 8 Left
8	Return 8 Right

}

}

}

}

5

6

7

8

STEREO OUTPUTS

These connectors provide the balanced return signal from channels 1 to 8 according to the switch positions for connection of active speakers or other monitoring systems. The level is controlled by the LINE OUT pot. If FIXED mode is activated (switch depressed), the return signals are passed 1:1 to the

STEREO OUTPUTS.

PHONES OUT

This stereo connector provides the same signal as the front-panel headphones output. Its level is also controlled by the VOLUME pot on the front panel. You can connect two headphones at a time (see page 8, PHONES OUT).

AC

For connection of the Router to AC power using the included power cord.

6