Sherwood RX-5502 manual Troubleshooting Guide, Problem Possible Cause Remedy

Page 24

RX-5502(G)2007.8.174:33PM페이지23

Troubleshooting Guide

If a fault occurs, run through the table below before taking your receiver for repair.

If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult with your dealer. Under no circumstances should you repair the receiver yourself as this could invalidate the warranty.

PROBLEM

POSSIBLE CAUSE

REMEDY

No power

• The AC input cord is disconnected.

• Connect the cord securely.

 

• Poor connection at AC wall outlet or the

• Check the outlet using a lamp or another

 

outlet is inactive.

appliance.

 

 

 

No sound

• The speaker cords are disconnected.

• Check the speaker connections.

 

• The volume is adjusted too low.

• Adjust the volume.

 

• The MUTE button on the remote control is

• Press the MUTE button to cancel the

 

pressed to ON.

muting effect.

 

• Speakers are not switched on.

• Switch on the desired speakers.

 

• Incorrect selection of the input source.

• Select the desired input source correctly.

 

• Incorrect connections between the

• Make connections correctly.

 

components.

 

 

 

 

Stations cannot be

• No antenna is connected.

• Connect an antenna.

received

• The desired station frequency is not tuned

• Tune in the desired station frequency.

 

in.

 

 

• The antenna is in wrong position.

• Move the antenna and retry tuning.

 

 

 

Preset stations cannot be

• An incorrect station frequency has been

• Memorize the correct station frequency.

received

memorized.

 

 

• The memorized stations are cleared.

• Memorize the stations again.

 

 

 

Poor FM reception

• No antenna is connected.

• Connect an antenna.

 

• The antenna is not positioned for the best

• Change the position of the antenna.

 

reception.

 

 

 

 

Continuous hissing noise

• Weak signals.

• Change the position of the antenna.

during FM reception,

 

• Install an outdoor antenna.

especially when a stereo

 

 

broadcast is received.

 

 

 

 

 

Continuous or intermittent

• Noise is caused by motors, fluorescent

• Keep the receiver away from noise

hissing noise during AM

lamps or lightning, etc.

sources.

reception, especially at

 

• Install an outdoor AM antenna.

night.

 

 

 

 

 

No recording

• Incorrect selection between the

• Make connections correctly.

 

components.

 

 

• Incorrect operation of each component for

• Operate each component correctly.

 

playback and recording.

 

 

 

 

Remote control unit does

• Batteries are not loaded or exhausted.

• Replace the batteries.

not operate.

• The remote sensor is obstructed.

• Remove the obstacle.

 

 

 

23

Page 23 Page 25
Image 24
Page 23 Page 25
Contents RX-5502G2007.8.17433PM페이지1 RX-5502G2007.8.17433PM페이지1 Introduction Read this Before Operating Your UnitContents Connecting ANTENNAs System ConnectionsConnecting Phono AC Input Cord Front Panel & Remote Controls Front Panel Remote Controls Fluorescent DisplayPress the button to select the desired input source Remote Control Operation Range Loading Batteries Remove the coverLoad two batteries matching the polarity Standby mode, turn the power on Switch the desired speakers onOperations Listening to a Program SourceSelect the desired input source To listen with the headphones Adjusting the tone bass and trebleEnter the tone mode At the desired tone mode, adjust the tone as desiredAdjusting the sound volume balance Enter the balance modeAuto tuning Select the tuning modeListening to Radio Broadcasts Select the tuner and then the desired bandManual tuning Auto presetting Manual presettingTuning to preset stations Select the desired preset numberRepeat the above steps 1 to 3 to memorize other stations FM mode, select the RDS search mode RDS SearchFM mode, press the Search Mode button twice FM mode, press the Search Mode button three timesTP Search PTY SearchDisplay Operating the sleep timer Adjusting the brightness of the fluorescent displayRecording Other FunctionsEnter the ROOM2 mode Turn on the ROOM2 modeROOM2 Playback Select the desired ROOM2 speakersSelect the desired ROOM2 input Troubleshooting Guide Problem Possible Cause RemedySpecifications Amplifier Section
Related manuals
Manual 23 pages 38.72 Kb

RX-5502 specifications

The Sherwood RX-5502 is an exceptional audio receiver designed to deliver a pristine sound experience in home entertainment systems. Renowned for its robust performance and rich feature set, the RX-5502 is ideal for audiophiles and casual listeners alike, providing a perfect blend of power and versatility.

At the heart of the RX-5502 is its impressive amplifier section, which boasts a power rating of 100 watts per channel. This ensures ample volume levels and dynamic range to fill any listening environment. The receiver is equipped with a high-quality digital signal processor (DSP), which enhances audio playback by applying various sound enhancements and equalization settings. This allows users to tailor their listening experience to their preferences, whether they are enjoying music, watching movies, or gaming.

One of the standout features of the RX-5502 is its support for various audio formats, including surround sound formats like Dolby Digital and DTS. This enables immersive audio experiences that transport listeners into the heart of the action, making it an ideal choice for movie lovers and gamers alike. Additionally, the receiver includes a built-in AM/FM tuner, offering access to numerous radio stations and the ability to save favorite presets.

Connectivity options are plentiful on the RX-5502, with multiple HDMI inputs for a seamless integration with modern devices. The receiver supports 4K pass-through, ensuring compatibility with the latest high-definition video standards. Furthermore, it boasts a range of audio input options, including optical and coaxial connections, as well as traditional analog inputs, accommodating various sources such as CD players, turntables, and streaming devices.

The RX-5502 also features a convenient and user-friendly interface, with an on-screen display that simplifies navigation through settings and options. The included remote control allows for easy operation from the comfort of the couch, making it simple to adjust volume levels, switch sources, and manage playback.

In conclusion, the Sherwood RX-5502 stands out as a powerful and versatile audio receiver. With its robust build quality, impressive audio performance, extensive connectivity options, and user-friendly design, it is a worthy addition to any home theater or music system. Whether for a casual listening session or an epic movie night, the RX-5502 ensures an engaging audio experience that captivates and entertains.
Top Page Image Contents