Installation Instructions
Continued
9.Grasp sides of compactor drawer and place bottom of drawer into tracks. Lift at the handle so the front of drawer will go over drawer stops. Close drawer.
Check if drawer opens freely. If the toe plate rubs against floor, see “Adjusting the toe plate” for further instructions.
Adjusting the toe plate
If the toe plate rubs the floor covering, the toe plate clearance may be changed as follows:
a. Mark on each side of the toe plate the amount of toe plate that rubs the floor covering.
b. Remove the drawer from the unit. (See Step 3.)
c. Use a rule and pencil or chalk to draw a line between the marks on each side of toe plate.
d. Use scissors to cut toe plate along line.
e. Replace drawer. (See Step 9.) If toe plate still rubs floor covering, repeat steps
6