Tricity Bendix DH 086 manual Adjusting the worktop, Fitting under a counter, Levelling

Page 19

Adjusting the worktop

You can move the worktop forward or backward by 25 mm in order to align the machine with other kitchen units.

Simply unscrew the two front retaining screws, move the top to the required position and then retighten the screws.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

Proceed as follows:

-Remove the machine’s worktop by unscrewing the two front retaining screws, pull from the front and slide out the rear slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.

Levelling

IN02

570-

600

820

450

IN04

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on the levelling spacers on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

IN06

IN07

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Dishwasher Contents Conservation Important safety informationInstallation Child SafetyControl panel Wash programme phase indicatorPrewash / Rinse and Hold Wash Cold rinse Hot rinse Drying Levels 3 Setting the water softenerTo adjust the water softener Level Before useTo fill Filling with saltTo fill with salt, unscrew the cap of the salt container Ensure that the lid is closed after every refill Adjusting the doseRinse aid Filling with rinse aidOpen the door and slide out the baskets to load the dishes Using your applianceLoading your appliance Lower basketUpper basket Adjusting the height of the upper basketTo move to the higher position proceed as follows Compact detergents with enzymes Use of detergentItems not suitable for dishwashers Hints and tipsTo save energy For best washing and drying resultsProgramme Degree of soil Washing programmesOperating sequence Frost precautions Internal cleaningCleaning the large filter External cleaningAlways insist on genuine spare parts Service and spare partsSymptom Something not workingHints for test centres Technical specificationsThis dishwasher must be plumbed into a cold water supply Water supply connectionsWater outlet hose connection Remove all packaging before positioning the machineElectrical connection Kitchen worktop or sink Adjusting the worktopFitting under a counter Levelling152995 62/3 Customer care telephone number 08705 950
Top Page Image Contents