If the door glass panel becomes chipped or has deep scratches the glass will be weakened and must be replaced to prevent the possibility of the panel shattering. Please contact your local Service Force Centre who will be pleased to advise further.
TO REPLACE THE OUTER DOOR GLASS
1.Holding the oven glass with both hands, gently place the locators into the holes of the brackets at the bottom of the oven door.
2.Holding the door glass with your left hand, use your right hand to open the oven door.
Bring the door gently towards the glass panel ensuring the screw location holes line up.
3.Place the trim in the correct position on the top of the grill door.
4.Hold the glass in place with one hand and insert the cross head screws with washers into the location holes with the other hand. Give the screws one turn to ensure the glass is secure.
5.Tighten the screws positively with a Pozidrive screwdriver before closing the oven door.
DO NOT attempt to use the oven without the glass being in place.
CLEANING THE INNER GLASS DOOR
The inner glass door is not removable. Clean using hot soapy water or Hob Brite and a soft cloth. DO NOT use abrasives as they may damage the glass or seal.
CLEANING INSIDE THE OVEN AND GRILL COMPARTMENTS
The Stayclean surface on the rear oven panel in the fan oven should not be cleaned manually.
The vitreous enamel in the grill compartment and the fan oven base and sides can be cleaned using normal oven cleaners with care. Ensure that the manufacturers instructions are followed and that all parts are well rinsed afterwards.
Aerosol cleaners must not be used on the Stayclean rear oven panel and must not come into contact with elements or the door deal as this may cause damage.
During normal use the Stayclean coating will become splashed with fats and food residues. By running the oven without food, the Stayclean surfaces burn off any soilage.
TO REMOVE THE WIREWORK RUNNERS
The wirework runners in the grill and oven cavities can be removed for cleaning.
1.Remove all shelves and furniture from the grill and oven compartments.
2.Hold the wirework at the bottom, unclip from the cavity side and gently pull towards the centre of the grill or oven compartment.
3.Unhook the runner at the top and remove from the cavity.
SIDE PANEL
CAVITY
CENTRE
4.To replace, hook the wirework runner back into the grill/oven sides.
Ensure that the wirework runners are firmly in place before refitting the oven shelves.
CLEANING THE SHELVES, WIREWORK RUNNERS AND GRILL/OVEN FURNITURE
All removable parts, except the grill pan handle can be washed in the dishwasher.
The grill pan, grill pan grid, oven shelves and wirework runners may be cleaned using a soap impregnated steel wool pad. Soaking first in hot soapy water will make cleaning easier.
25