Tricity Bendix MDB700 Connecting to the Mains Terminal, Checking Electrical Connections

Page 11

INSTALLATION INSTRUCTIONS

CONNECTING TO THE MAINS TERMINAL

Warning: This appliance must be earthed.

￿We recommend you use a new length of 6mm2 twin core and earthed cable to ensure your safety.

￿Make connection as shown in Fig. 12 by proceeding as follows:-

Fig.12

￿Preform wires to the appropriate shape to suit fitting into the mains terminal block.

￿Strip inner insulation on wires using wirestrippers.

￿Twist the bared wires using pliers.

￿Cut bared wires 10mm away from the end of the inner insulation. Where uninsulated Earth wires are used ensure they are suitably sheathed to leave 10mm bare wire fit into the terminal.

￿Clamp bare wires into the relevant terminal and check they are held by tugging each one in turn.

￿Clamp the mains cable securely ensuring 5mm of the outer insulation is inside the terminal block and that the wires are not taught but not so slack as to cause any fouling. See Fig. 12.

￿Connect the remaining end of the mains cable to the cooker point / junction box.

￿Place fuse / miniature circuit breaker in circuit and switch on at mains.

CHECKING ELECTRICAL CONNECTIONS

￿Confirm the appliance is correctly connected by switching on and observing the various oven functions indicators.

CONNECTING TO A HOB OR COOKER POINT

￿Either follow in general terms the instructions for connecting to the terminal block or refer to the hob suppliers installation instructions.

Feed the cable through the cabinet and arrange to route the cable away from the appliance.

NOTE: HOUSE CIRCUIT

Earth leakage / continuity tests must be carried out before the appliance is connected to the mains supply and re-checked after fitting.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents MDB700 Model NO. MDB700 Technical DetailsContents Uses of Defrost Feature During Operation SafetyGeneral After USEChoice of Electrical Connection Installation InstructionsThings to Note Preparing Cabinet for Fitting Oven To Remove Cover of Mains Terminal HOW to Finish UnpackingChecking Electrical Connections Connecting to the Mains TerminalConnecting to a HOB or Cooker Point Fitting Into the Space Between Cabinets Introduction About Condensation and Steam General Notes on Using Your ApplianceOven Indicator Neon Rating PlateGrill and Oven Furniture Grill PAN and Handle HOW to USE the GrillGrill Uses of the GrillGrill pan must not be located in the shelf runners Hints and TipsPosition Grilling ChartTo FIT the FAN Oven Shelves HOW to USE the FAN OvenFAN Oven Uses of the FAN OvenHints and Tips Food Shelf Temp C Position FAN Oven Cooking ChartRoasting Chart Roasting ChartHOW to Defrost Defrost FeatureUses of Defrost Feature Cleaning the Outer and Inner Door Glass Panels Care and CleaningCleaning the Brass Plated Handles and Controls Cleaning the Outside of the ApplianceTo Replace the Outer Door Glass Cleaning the Inner Glass DoorCleaning Inside the Oven and Grill Compartments To Remove the Wirework RunnersCooking to Reduce Soilage Grill and oven do not work Something not WORKING?Service and Spare Parts Standard guarantee conditions Guarantee ConditionsPage Page Consumer care telephone number 08705
Top Page Image Contents