Introduction, Rating Plate, Installation

INTRODUCTION

WARNING: THIS APPLIANCE MUST BE EARTHED

RATING PLATE

This is situated on the lower front frame of the appliance and can be seen upon opening the cavity door. Alternatively the rating plate may also be found on the back or top of some models (where applicable).

The appliance must be protected by a suitably rated fuse or circuit breaker. The rating of the appliance is given on the rating plate.

Do not remove the rating plate from the appliance as this may invalidate the guarantee.

INSTALLATION

If your appliance has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your appliance left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact your supplier for advice.

Once the packaging has been removed the appliance should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the appliance as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation in all poles. The cable must have conductors of sufficiently high cross- sectional area to prevent overheating and deterioration.

The recommended cross-section area is six square millimetres (6.00mm2).

The cable should be routed away from potentially hot areas marked by X in the diagram below.

To move the appliance, open the main oven door, and lift the appliance by holding inside the top of the compartment.

This is a type Y appliance, which means it is free- standing and can be fitted with cabinets on one or both sides. It may also be fitted in a corner setting.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm at either side of the appliance is required to enable the appliance to be moved into position.

Always ensure an air gap is maintained at hotplate level. Tiles or other forms of deep wall covering should not obscure this gap.

Air gap

Overhanging surfaces or a cooker hood should be a minimum of 685mm above the hob.

It is important to ensure that the appliance is level after installation. Levelling feet are fitted to the appliance to accommodate uneven floors.

SIE401 specifications

The Tricity Bendix SIE401 is an innovative built-in oven that captures the needs of modern cooking enthusiasts. This appliance is engineered to deliver exceptional performance while ensuring ease of use and functionality. With an array of features and cutting-edge technology, the SIE401 stands out as a versatile addition to any contemporary kitchen.

One of the key characteristics of the Tricity Bendix SIE401 is its spacious interior. With a net capacity of 62 liters, it provides ample space for preparing multiple dishes simultaneously. This makes it particularly beneficial for larger families or for those who enjoy entertaining guests. The oven is designed with multi-level cooking capabilities, allowing users to bake, roast, and broil in various positions while ensuring even heat distribution.

The SIE401 is equipped with advanced cooking technologies that enhance performance. The fan-assisted convection system ensures that heat circulates evenly throughout the oven, eliminating hot spots. This means that users can achieve perfectly cooked dishes every time, whether they are baking cakes or roasting meats. Additionally, the oven features multiple cooking functions, including grilling, defrosting, and conventional cooking, providing versatility for a wide range of culinary tasks.

Another notable feature of the Tricity Bendix SIE401 is its user-friendly interface. The appliance is fitted with an intuitive control panel that simplifies the cooking process. Users can easily select their desired cooking function and set precise temperatures using programmable settings, ensuring consistent results.

Energy efficiency is also a significant characteristic of the SIE401. It is rated with a high energy efficiency score, helping users to minimize their energy consumption while cooking. This is not only beneficial for the environment but also helps reduce utility bills over time.

Safety is paramount in the design of the Tricity Bendix SIE401. The oven is constructed with a cool-touch door, ensuring that the exterior remains safe to touch during operation. Additionally, it includes a programmable timer, providing peace of mind for users who may step away while cooking.

In summary, the Tricity Bendix SIE401 combines practicality, reliability, and modern design, making it an excellent choice for anyone looking to enhance their cooking experience. With its spacious capacity, advanced cooking technologies, energy efficiency, and safety features, it stands as a testament to the brand’s commitment to quality and innovation in kitchen appliances.