Tricity Bendix SIE424 To Clean the Inner Glass Door Panels, Replacing the Oven Light Bulb

Page 27

TO REPLACE THE OUTER GLASS

1.Holding the oven glass with both hands, gently place the locators into the holes of the brackets at the bottom of the oven door.

2.Push the top of the oven glass towards the oven door, ensuring the screw location holes line up.

3.Hold the glass in place with one hand and insert the cross head screws into the location holes with the other hand. Give the screws one turn to ensure the glass is secure.

4.Tighten the screws positively with a Pozidrive screwdriver before closing the oven door.

Do Not attempt to use the oven without the glass being in place.

If the door glass panel becomes chipped or has deep scratches the glass will be weakened and must be replaced to prevent the possibility of the panel shattering. Please contact your local Service Force Centre who will be pleased to advise further.

TO CLEAN THE INNER GLASS DOOR PANELS

Clean the inner glass door panels using a soft cloth and hot water to which a little washing up liquid has been added. If the inner panel is heavily soiled, Hob Brite may be used. Do not use abrasive cleaning materials on the door glass. Ensure that all parts are well rinsed and thoroughly dried before attempting to replace the glass.

REPLACING THE OVEN LIGHT BULB

The type of bulb required is a 300°C 25 watt small Edison Screw. Part number 572 491 5431-00/1 (Available through your local Service Force Centres).

CAUTION: Disconnect the appliance from the electricity supply before replacing the bulb.

Open the door and remove the shelves to enable easy access to the oven light assembly. Insert a flat blade screwdriver between the oven side and glass which covers the bulb.

Support the glass with your hand and prise out sufficiently to release the glass cover. Unscrew the bulb in an anticlockwise direction until it is possible to remove the bulb with ease.

Fit the new bulb by turning in a clockwise direction until it is secure. Ensuring the indent to the flange is pointing to the rear of the oven, replace the glass by pushing it firmly into the hole to cover the bulb assembly.

Replace the shelves. Restore the electricity supply and adjust the time of day and clock as necessary.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents SIE424 Model NO. SIE Technical DetailsContents Uses of Defrost Feature Selecting Defrost Preface During Operation SafetyGeneral After USEInstallation IntroductionRating Plate Grill and Oven Furniture General Notes on Using Your ApplianceAbout Condensation and Steam Cooling FAN for ControlsAB C DE FeaturesGetting to Know Your Appliance Control PanelTo SET the Time of DAY Electronic Minute MinderMinute Minder To Cancel the Minute MinderCeramic HOB Recommended SaucepansHints and Tips Deep FAT Frying PreservingSpecial Frying Note Things to Note Dual GrillUses of the Grill Selecting the GrillHints and Tips Grilling ChartTo FIT the TOP Oven Shelf TOP OvenUses of the TOP Oven Selecting the TOP OvenHints and Tips To FIT the Main Oven Shelves Main FAN OvenUses of the FAN Oven Selecting the FAN OvenHints and Tips Oven Cooking Chart Roasting Chart Roasting ChartDefrost Feature Uses of Defrost FeatureSelecting Defrost Care and Cleaning To Remove Discolourations or White and Silver Marks Cleaning the Grill and Oven FurnitureCleaning Inside the Oven and Grill Compartments To Remove Burnt on SoilageTo Remove the Outer Glass Care of Stayclean SurfacesCleaning the Door Glass Cleaning Between the Outer and Inner Door GlassTo Clean the Inner Glass Door Panels Replacing the Oven Light BulbTo Replace the Outer Glass Appliance does not work at all Something not WORKING?Service and Spare Parts Standard guarantee conditions Guarantee ConditionsPage Important Notice Consumer care telephone number 08705
Top Page Image Contents