Using the Hob
The Hob Burners
The symbol on the control panel shows which burner is operated by the knob. (See control panel).
Off Maximum level
Minimum level
•Upon ignition, adjust the flame as required.
OR Power Cut
•Push the corresponding knob in completely and turn it left to the “large flame“ symbol and ignite with a match.
•Release the knob and check that the burner has ignited.
•Upon ignition, adjust the flame as required. If for any reason the flame should extinguish turn off the relevant control knob, leave for at least one minute and then
If after a few attempts the burner does not ignite, check that the burner ring and its cap are correctly positioned.
Turning off the burners
Turn the control knob clockwise to mark « 
».
Use the maximum level for boiling and the minimum for simmering.
Always choose positions between the minimum and maximum, never between maximum and off.
Ignition of the burners
•Push the knob and turn it left to the “large flame“ symbol.
•At the same time, push the electronic ignition knob (see fig). Keep it pushed until the gas ignites (1 spark / second).
•Release the knob and check that the burner has ignited.
Do not put anything on the hob that is liable to melt.
Selecting the Correct burner
Above every knob there is a symbol for the corresponding burner.
For good cooking results, always choose pans, which correctly fit to the diameter of the burner used (see figs). Choose thick, flat bottom pots.
We recommend the flame is lowered as soon as the liquid starts boiling.
Good use
Bad use
(Power waste)
11