Sound Performance Lab 2595 manual Important Safety Information

Page 4

Important Safety Information

Please note and retain this information. Carefully read and follow all of the safety and oper- ating instructions before you use the machine. Be doubly careful to note and follow the warn- ings and special safety notices.

Connections: Only use the connections as described. Other connections can lead to health risks and equipment damage.

Water and Humidity: Do NOT use this machine anywhere near water (for example near a wash basin or bath, in a damp cellar, near swimming pools, or the like). In such cases there is an extremely high risk of fatal electrical shocks!

Insertion of Foreign Objects or Fluids: NEVER allow a foreign object through any of the machine‘s chassis openings. You can easily come into contact with dangerous voltage or cause a damaging short circuit. NEVER allow any fluids to be spilled or sprayed on the machine. Such actions can lead to dangerous electrical shocks or fire!

Opening the Machine: Do NOT open the machine housing, as there is great risk you will damage the machine, or – even after being disconnected – you may receive a dangerous elec- trical shock!

Electrical Power: Run this machine ONLY from sources which can provide proper power at the prescribed rating. When in doubt about a source, contact your dealer or a professional electri- cian. To be sure you have isolated the machine, do so by disconnecting the power cord from your wall connection. Be sure that the power cord plug is always accessible. When not using the machine for a longer period, make sure to unplug it from your wall power socket.

Power Cord Protection: Make sure that your power cord is arranged to avoid being stepped on or any kind of crimping and damage related to such event. Do not allow any equipment or furniture to crimp this power cord.

Power Connection Overloads: Avoid any kind of overload in connections to wall sockets, extension or splitter power cords. Always keep manufacturer warnings and instructions in mind. Overloads create fire hazards and risk of dangerous shocks!

Lightning: Before thunderstorms or other severe weather, disconnect the machine from wall power (but to avoid life threatening lightning strikes, not during a storm). Similarly, before any severe weather, disconnect ALL the power connections of other machines and antenna and phone/internet cables which may be interconnected so that no lightning damage or over- load results from such secondary connections.

Air Circulation: Chassis openings offer ventilation and serve to protect the machine from overheating. NEVER cover or otherwise close off these openings. NEVER place the machine on a soft surface (carpet, sofa, etc.). Make sure to provide for a mounting space of 4-5 cm/2 inches when mounting the machine in racks or cabinets.

Repairs: Unplug the machine and immediately contact a qualified technician when you think repairs are needed – or when moisture or foreign objects may accidentally have gotten in to the housing, or in cases when the machine may have fallen and shows any sign of having been damaged. This also applies to any situation in which the machine has not been subjected to any of these unusual circumstances but still is not functioning normally or its perfor- mance is substantially altered.

In cases of damage to the power cord or its plug, first consider turning off the main circuit breaker before unplugging the power cord.

Operate the controls and switches only as described in the manual. Incorrect adjustments outside safe parameters can lead to damage and unnecessary repair costs. Never use the switches or level controls to effect excessive or extreme changes.

Replacement/Substitute Parts: Be sure that any service technician uses original replacement parts or those with identical specifications as the originals. Incorrectly substituted parts can lead to fire, electrical shock, or other dangers, including further equipment damage.

Safety inspection: Be sure always to ask a service technician to conduct a thorough safety check and ensure that the state of the repaired machine is in all respects up to factory stan- dards.

Cleaning: In cleaning, do NOT use any solvents, as these can damage the chassis finish. Use a clean, dry cloth (if necessary, with an acid-free cleaning oil). Disconnect the machine from your power source before cleaning.

4

Passeq

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Manual SPL electronics GmbH Sohlweg Manual Passeq, ModelWeee Registration 973 349 88 Contents Important Safety Information Hook Up Symbols and NotesRack Mounting Special Features IntroductionAdvantages of Passive Filtering Passive Filters with 120 Volt Makeup AmplifiersFilter Types Single Core CoilsVolt Makeup Amplifiers SPL Supra Op-AmpsInput Stages of the Supra Components Intermediate Stages of the Supra ComponentsLundahl Transformers Other FeaturesConclusion Power switch and voltage Rear PanelIPU/% DPME   Selector Please refer toConnections OperationOne Coil per Filter, one Core per Coil Allocation of FrequenciesFrequency Table/per Band Boost Cut FrequenzCut LF-LMF Cut MF-MHF Cut MHF-HF Boost LF Boost HFLF-LMF Cut and LF Boost Operational ElementsMF-MHF Cut and LMF-MHF Boost HF Boost Q Settings with the Proportional Q Principle MHF-HF Cut and HF BoostMHF-HF Cut Output ControlBasic Approaches and Working Techniques Recommendations on using EqualizersEQ Yin & Yang First control levels, then apply EQ First cut, then boostReducing bleed within an instrument‘s frequency range Boosting harmonic frequency levelsCutting fundamental levels Emphasis of an instrument‘s main frequenciesMix-or not? Splitting frequency bands to reduce masking effectsImproves the presence of bass lines Classical instruments and their frequencies Basics of Frequency Filtering Frequency and EnergyTone and Sound Sound Correction and Sound DesignFrequency Filters Shelf FiltersPeak Filters BandwidthEqualizer Passive EQsParametric EQs Active EQsGraphic EQs Power Supply SpecificationsGuarantee & Product Registration Copy Master Recall Settings Engineer Artist Tracks/Groups Album Date TitleManual Passeq

2595 specifications

The Sound Performance Lab 2595 is a cutting-edge audio processor designed to elevate mixing and mastering workflows for both professionals and enthusiasts alike. This device stands out in the competitive landscape of audio equipment, thanks to its blend of innovative technologies, high-quality sound processing, and user-friendly features.

One of the main features of the 2595 is its dual-channel architecture. This allows users to process two audio signals simultaneously, making it an ideal choice for stereo applications. Designed for flexibility, the device can be used for various purposes, including mixing, mastering, and live sound reinforcement. The 2595 boasts an intuitive layout, making it easy to navigate its range of functions and settings, even for those who may be new to audio processing.

The heart of the 2595 lies in its advanced digital signal processing (DSP) capabilities. The device is equipped with high-resolution converters, allowing for pristine audio quality with minimal latency. This ensures that the integrity of the original sound is maintained, which is a crucial aspect for any serious sound engineer or musician. Additionally, the built-in algorithms are designed to enhance the audio signal intelligently, providing users with options for dynamic range control, spectral processing, and various filtering techniques.

Another notable characteristic of the Sound Performance Lab 2595 is its extensive connectivity options. The device includes both analog and digital I/O, making it compatible with a wide range of audio sources and studio environments. This versatility is essential for professionals who often work with various formats and formats, ensuring that the 2595 can seamlessly integrate into any setup.

The user experience is further enhanced by the inclusion of a bright, user-friendly display that provides real-time feedback on processing parameters. This feature allows users to make precise adjustments quickly, facilitating a more efficient workflow. Furthermore, the 2595's robust construction ensures that it is built to withstand the rigors of both studio and live applications, making it a reliable choice for any audio professional.

In conclusion, the Sound Performance Lab 2595 represents a significant advancement in audio processing technology. With its dual-channel processing capability, high-quality DSP, extensive connectivity options, and user-friendly interface, it caters to a wide range of audio applications while maintaining exceptional fidelity and performance. This makes the 2595 a valuable tool for anyone looking to achieve professional-grade sound in their projects.
Top Page Image Contents