AUTOMATIC CONTROL
You can only use the automatic control for the main oven. When you use the automatic controls for the first time it’s probably best to choose a time when you are at home. That way you can check to make sure you’ve set everything correctly and you’ll feel much more confident when you are away from home in the future.
SETTING THE CONTROLS FOR
AUTOMATIC USE
This is very easy. All you have to do is work through the steps below. The clock will work out the rest for itself.
1 Is the electricity supply on?
2 Is the clock | To adjust turn the selector knob | |
showing the | to ‘Manual’ then to ‘Time | |
correct time? | Setting’. Turn the setting knob in | |
| either direction. |
|
3How long will the food take to cook?
Turn the selector knob to ‘Cook Time’. Then turn the setting knob until the length of time you want the food to cook shows in the display. The maximum cooking time is 10 hours. ‘Auto’ will show in the display.
4What time do you want the food to be cooked by?
Turn the selector knob to ‘End Time’. Turn the setting knob until the time the oven is to switch off shows in the display. The cookpot () will go out.
The ‘End Time’ must not be more than 23 hours 59 minutes from the time of day. For example if the time of day is 9.00 am the latest ‘End Time’ will be 8.59 am the next day.
5 | Set to | Turn | the selector knob to |
| automatic. | ‘Automatic’. | |
6 | Turn on the | Turn | the oven control to the |
| oven control. | required setting. |
The time shown on the right gives an example of setting the automatic controls when the time is 9.00 am, the food is to be cooked for 2½ hours and the food is needed at 6.00 pm (1800 hours).
The clock will work out what time the oven will switch itself on and it will turn the oven off at the end. Once the automatic sequence is finished there will be an alarm to remind you that you need to set the oven for manual operation. To do this turn the selector knob to ‘Manual’. Turn off the oven control.
If you change your mind and want to cancel a programme that you have set simply turn to ‘Time Setting’ and then to ‘Manual’.
13