![](/images/new-backgrounds/1088200/882009x1.webp)
SECTIONSECTION1 - DESCRIPTION1
DESCRIPTION
A. FEATURES
Toastmaster™ Model TB208, TB240, TW208, and TW240 Toasters are:
B. COMPONENT LOCATION
The major components of the toaster are shown in Figure
•Conveyor toasters.
•Equipped with an entry rack used to deliver the food product into the toaster.
•Equipped with an internal
•Equipped with an exit rack and a return crumb tray.
•Equipped with a “Standby” mode that saves energy during slow periods and allows a quick return to normal operation.
Figure
Component location
4. Conveyor
3. Entry rack
5. Heating elements
(inside toaster)
2. DARKER/LIGHTER knob
6. Exit rack
1. ON/OFF/STANDBY knob
7. Return crumb tray
C. COMPONENT FUNCTION (see Figure 1-1)
1.ON/OFF/STANDBY knob - see Section 3, Operation.
2.DARKER/LIGHTER knob - see Section 3, Operation.
3.Entry rack - Loaded with the product to be toasted. The product then slides onto the conveyor. The entry rack can be removed for cleaning.
4.Conveyor - Transports the product through the toaster, and between the top and bottom heating elements. The conveyor is driven by its own motor.
5.Heating elements - Toast the food product. Three elements are located above the conveyor, while one is located below it.
6.Exit rack - Receives the toasted product as it leaves the conveyor, then delivers the product underneath the front of the toaster. The exit rack can be removed for cleaning.
7.Return crumb tray - Collects crumbs from the toasted product. The tray can be removed for cleaning.