SECTIONSECTION2 - INS ALLATION2
INSTALLATION
A. UNPACKING
IMPORTANT
IT IS THE CUSTOMER’S RESPONSIBILITY TO REPORT ANY CONCEALED OR
1.Remove the staples from the shipping carton.
2.Lift out the foam packaging and poly bag from around the toaster.
3.Carefully lift the toaster out of the carton.
4.Remove all loose materials from the carton, including the information packet.
5.Remove any parts or packaging materials from inside the toasting chamber.
6.Retain all shipping materials until it is certain that the toaster has not suffered concealed shipping damage.
B. ASSEMBLY
1.Thread the 4” (102mm) legs into the four holes on the bottom of the toaster. See Figure
2.Install the entry rack, exit rack, return crumb tray, and
| Figure | |
Exit rack | Entry rack | |
secures on hooks | ||
drops into holes | ||
on inside rear wall | ||
on brackets | ||
of toaster | ||
|
Slide-out crumb tray
slides into opening in front of toaster
Legs (4) | Return crumb tray | |
thread into holes | ||
slides underneath | ||
in bottom of toaster | ||
exit rack | ||
|