Electrical Connection

IMPORTANT

•An electrical schematic for the toaster is provided at the back of this Manual.

•The electrical connection to the toaster requires a circuit breaker/fused disconnect. Consult appli- cable national and local code requirements to de- termine the rating of the breaker/disconnect. Elec- trical specifications are listed on the toaster’s se- rial plate and in the Specifications section of this Manual.

•The toaster’s power cord and plug provide an electrical ground connection. A separate equipotential ground connection must also be made if required by national or local codes. The location of the equipotential ground lug is shown in Figure 3.

•Consult all applicable national and local codes for further electrical connection requirements.

1.Before proceeding with the electrical connection, check that the electrical supply matches the toaster’s requirements. Refer to the serial plate and to the Specifications section of this Manual.

WARNING

ENSURE THAT BOTH THE CIRCUIT BREAKER/FUSED DISCONNECT AND THE SWITCH ARE IN THE “O” (OFF) POSITION BE- FORE PROCEEDING.

WARNING

ENSURE THAT ANY PACKING MATE- RIAL RESIDUE HAS BEEN REMOVED FROM INSIDE THE TOASTING CHAMBER.

Figure 3 - Equipotential Ground Connection

Equipotential ground

lug and symbol

2.Check that the appropriate receptacle is available for the power cord plug.

3.Insert the power cord plug into its receptacle.

4.If required by national or local codes, connect an

equipotential ground wire to the lug next to the symbol (shown in Figure 3). The equipotential

ground connection must meet all applicable na- tional and local code requirements.

Checking the Installation

1.Check that the toaster is properly connected to the electrical power supply.

2.Switch the circuit breaker/fused disconnect to the ON (“I”) position.

3.Switch the switch to the ON (“I”) position. The

display will flash as the toaster pre-heats.

4.Allow the toaster to pre-heat for 15 minutes, until appears in the display.

CAUTION - HOT SURFACES

USE CAUTION TO AVOID INJURY.

5.Look inside the toasting chamber and visually check that the heating elements are heating and glowing red.

6.Push and hold the key for 2 seconds.

7.Push the key.

8.Check that the digital timer begins counting down.

9.Wait for the preset time to elapse. The control should sound an alarm as follows:

•The control will beep 5 times at 1-second intervals.

•Next, the control will beep very rapidly for another 5 seconds.

•Next, the control will sound a steady tone.

10.Press the key. The timer will reset, and the steady tone will shut off.

11.Switch the switch to the OFF (“O”) position. The fan will remain in operation to allow the toaster

to cool.

12.After the fan stops, switch the circuit breaker/fused disconnect to the OFF (“O”) position.

MBT208, MBT240 specifications

Toastmaster has long been a trusted name in culinary innovation, and their latest microwave models, the MBT240 and MBT208, exemplify this legacy of quality and efficiency. These robust appliances are designed to meet the diverse needs of both commercial and home kitchens, showcasing versatile cooking options and advanced features.

The MBT240 boasts a powerful 2400 watts of cooking power, making it ideal for high-volume cooking scenarios. Its spacious interior allows for accommodating large dishes or multiple smaller ones simultaneously, enhancing productivity in busy settings. Equipped with a user-friendly control panel, the MBT240 features programmable settings, allowing operators to save frequently used cooking times and power levels. This not only streamlines food preparation but also ensures consistency in cooking results.

On the other hand, the MBT208 is a compact 2080-watt microwave that balances power and convenience without sacrificing performance. Perfect for establishments with limited counter space, its sleek design integrates seamlessly into any kitchen layout. Like its counterpart, the MBT208 includes pre-programmed cooking options for various menu items, further simplifying the cooking process. Its efficient ceramic enamel interior promotes easy cleaning and quick maintenance, contributing to the appliance's longevity.

Both models incorporate advanced microwaving technologies such as inverter cooking, which delivers a more even heat distribution compared to traditional microwave ovens. This feature prevents hotspots in food, providing a superior cooking experience. Additionally, the inclusion of an energy-saving mode significantly reduces power consumption, aligning with sustainable practices in kitchen management.

Safety is prioritized in both models, featuring built-in mechanisms such as a child lock, overheat protection, and a safety interlock that ensures the microwave operates only when the door is securely closed.

In terms of design, Toastmaster has ensured that both the MBT240 and MBT208 are built to withstand the rigors of professional use. Their durable construction and thoughtful engineering make them not only reliable but also easy to incorporate into existing workflows in commercial kitchens.

In conclusion, the Toastmaster MBT240 and MBT208 stand out with their powerful performance, innovative technologies, and user-centered features. Whether for busy restaurants or home enthusiasts, these microwaves offer the versatility and efficiency needed to elevate any culinary experience.