Toastmaster MBT240, MBT208 warranty Close, Removing the Lower Deck

Page 8

Close

1.Switch the switch to the OFF (“O”) position. The fan will remain in operation to allow the toaster

to cool.

2.After the fan stops, switch the circuit breaker/fused disconnect to the OFF (“O”) position.

3.Cleaning the Peel and Lower Deck

CAUTION - HOT SURFACES

DO NOT TOUCH HOT SURFACES ON THE TOASTER. DO NOT REACH INTO THE TOASTING CHAMBER UNTIL THE UNIT HAS COOLED THOROUGHLY.

a.Remove the lower deck from inside the toaster. To remove the lower deck:

Pull the door handle forward to open the door.

Lift the front edge of the lower deck, and then pull it forward and out of the toaster. See Figure 6.

Release the door handle.

b.Wash the peel and the lower deck using a hot solution of McD All Purpose Concentrate (APC) (HCS). If necessary, scrub these com- ponents using a McD No Scratch Pad to re- move discolorations.

c.Rinse the peel and lower deck thoroughly.

d.Immerse the peel and lower deck in McD Sink Sanitizer Solution (HCS). Use 1 pack of so- lution for 10 gallons of water.

e.Remove the parts from the sanitizer solution, and allow them to air dry.

Figure 6 - Removing the Lower Deck

1. Pull door

handle forward

2. Lift front

edge of

lower deck

4. Release

door handle 3. Pull lower deck forward

4.Cleaning the Toaster

WARNING

WHEN CLEANING THE TOASTER, NEVER APPLY ENOUGH LIQUID TO STAND IN PLACE ON THE UNIT. DO NOT SPRAY, RINSE, OR SUBMERGE THE TOASTER. EXCESSIVE MOISTURE IN THE UNIT WILL CAUSE A SE- VERE ELECTRICAL HAZARD AND MAY OTH- ERWISE DAMAGE THE TOASTER.

CAUTION

DO NOT clean your toaster using abrasive clean- ers or pads. Both will scratch and dull the finish.

a.Thoroughly clean the fan (on the back wall of the toaster) using a stiff nylon brush. See Fig- ure 7.

CAUTION

The fan must be cleaned regularly. If the fan is blocked or plugged, bakery products will not be properly toasted and the toaster’s interior components may be damaged.

b.Wipe the exterior of the toaster with a clean, sanitized towel dampened with a hot solution of McD All Purpose Concentrate (APC) (HCS), as drawn from the sink proportioner.

c.Wipe the exterior of the toaster with a clean, sanitized towel dampened in water to remove any residual foreign material or cleaning so- lution. Ensure that all visible moisture has been removed from the unit.

d.Allow the exterior of the toaster to air dry.

5.Replace the lower deck inside the toaster.

6.Store the peel in a clean, dry location underneath the toaster.

7.Pull the door handle forward to open the door. Check that the back side of the door is slippery to the touch. If necessary, apply a thin coating of McD Bun Toaster Release Agent (HCS) to the back side of the door using a paper towel.

Figure 7 - Cleaning the Fan

8

Image 8
Contents Batch Toaster Models MBT208/MBT240About This Manual IntroductionsafetyBatch Toaster Information Specifications Overall DimensionsInstallation AssemblyChecking the Installation Electrical ConnectionOperation SET-UP, OPERATION, and Close ProceduresSetup Programming Select a Program to ChangeClose Removing the Lower DeckTroubleshooting Problem Probable Cause Corrective Action2828 Parts List Qty DescriptionOrdering and Service Information Requesting ServiceToaster Information Ordering PartsPage Electrical Wiring Diagram Wiring Diagram NotesElectrical Schematic Schematic NotesMiddleby Corp 24-Hour Service Hotline

MBT208, MBT240 specifications

Toastmaster has long been a trusted name in culinary innovation, and their latest microwave models, the MBT240 and MBT208, exemplify this legacy of quality and efficiency. These robust appliances are designed to meet the diverse needs of both commercial and home kitchens, showcasing versatile cooking options and advanced features.

The MBT240 boasts a powerful 2400 watts of cooking power, making it ideal for high-volume cooking scenarios. Its spacious interior allows for accommodating large dishes or multiple smaller ones simultaneously, enhancing productivity in busy settings. Equipped with a user-friendly control panel, the MBT240 features programmable settings, allowing operators to save frequently used cooking times and power levels. This not only streamlines food preparation but also ensures consistency in cooking results.

On the other hand, the MBT208 is a compact 2080-watt microwave that balances power and convenience without sacrificing performance. Perfect for establishments with limited counter space, its sleek design integrates seamlessly into any kitchen layout. Like its counterpart, the MBT208 includes pre-programmed cooking options for various menu items, further simplifying the cooking process. Its efficient ceramic enamel interior promotes easy cleaning and quick maintenance, contributing to the appliance's longevity.

Both models incorporate advanced microwaving technologies such as inverter cooking, which delivers a more even heat distribution compared to traditional microwave ovens. This feature prevents hotspots in food, providing a superior cooking experience. Additionally, the inclusion of an energy-saving mode significantly reduces power consumption, aligning with sustainable practices in kitchen management.

Safety is prioritized in both models, featuring built-in mechanisms such as a child lock, overheat protection, and a safety interlock that ensures the microwave operates only when the door is securely closed.

In terms of design, Toastmaster has ensured that both the MBT240 and MBT208 are built to withstand the rigors of professional use. Their durable construction and thoughtful engineering make them not only reliable but also easy to incorporate into existing workflows in commercial kitchens.

In conclusion, the Toastmaster MBT240 and MBT208 stand out with their powerful performance, innovative technologies, and user-centered features. Whether for busy restaurants or home enthusiasts, these microwaves offer the versatility and efficiency needed to elevate any culinary experience.