Programming, Select a Program to Change

Programming

The Batch Toaster is pre-programmed with standard menu programs at the factory. Perform the following steps ONLY if you wish to change a program’s settings.

IMPORTANT

Programming a new menu program will OVERWRITE an existing program. Do not overwrite a program that you wish to keep!

Refer to Figure 5 for an illustration of the controls used to program a menu selection.

1.Select a Program to Change

a.Push and hold the appropriate key. Af- ter 2 seconds, the control will beep once,

showing that the program has been selected.

DO NOT RELEASE THE KEY AT THIS TIME.

b.Continue to hold the key until the control

beeps twice and the display shows . Release the key. The “P” shows that

programming mode is now active, and “#:##”

is the currently-programmed set time. The

green light above the key will also flash to inform you which program will be changed.

2.Adjust the Set Time and Relays

NOTE

The toaster regulates heat through three relays. Each relay controls four of the twelve heating elements. Switching the relay on or off will also switch the four heating elements on or off. This allows the operator to adjust the toasting temperature.

Setting the relays to different on/off combinations for different menu programs allows the toaster to accomodate a variey of toasting temperatures.

Refer to the electrical wiring diagram at the back of this Manual for a listing of the heating elements that are controlled by each relay.

When programming mode is active, push the key to toggle the display between the

following settings:

“#:##” is the currently-programmed set time. When this display is shown, the set time can

be adjusted using the and keys.

b. or

Shows whether Relay 1 (and the heating elements that it controls ) is currently on (“on”) or off (“--”). When this display is shown, Relay 1 can be toggled on or off as desired with the or keys.

c. or

Displays the current setting for Relay 2 (and the heating elements that it controls). This setting can be changed as desired with the or keys.

d. or

Displays the current setting for Relay 3 (and the heating elements that it controls). This setting can be changed as desired with the or keys.

If necessary, you can continue to press the key to repeat the cycle.

3.Save Changes and Return to Operating Mode

When your changes are complete, press the key to save the changes. The toaster will return

to normal operating mode. Access the new

program by pressing the appropriate key.

Figure 5 - Control Panel Functions: Programming Mode

	Display:	STOP/START key:
Shows changes to the set time and relay settings		Locks in changes to a program

Green lights: Flash to show	PROGRAM 4 key:	PROGRAM 5 and 6 keys:
that a menu program (1-6) is	Toggles display between time	Adjust the set time up or down,
being programmed	and Relay 1, 2, and 3 settings	or toggle relay settings on or off

MBT208, MBT240 specifications

Toastmaster has long been a trusted name in culinary innovation, and their latest microwave models, the MBT240 and MBT208, exemplify this legacy of quality and efficiency. These robust appliances are designed to meet the diverse needs of both commercial and home kitchens, showcasing versatile cooking options and advanced features.

The MBT240 boasts a powerful 2400 watts of cooking power, making it ideal for high-volume cooking scenarios. Its spacious interior allows for accommodating large dishes or multiple smaller ones simultaneously, enhancing productivity in busy settings. Equipped with a user-friendly control panel, the MBT240 features programmable settings, allowing operators to save frequently used cooking times and power levels. This not only streamlines food preparation but also ensures consistency in cooking results.

On the other hand, the MBT208 is a compact 2080-watt microwave that balances power and convenience without sacrificing performance. Perfect for establishments with limited counter space, its sleek design integrates seamlessly into any kitchen layout. Like its counterpart, the MBT208 includes pre-programmed cooking options for various menu items, further simplifying the cooking process. Its efficient ceramic enamel interior promotes easy cleaning and quick maintenance, contributing to the appliance's longevity.

Both models incorporate advanced microwaving technologies such as inverter cooking, which delivers a more even heat distribution compared to traditional microwave ovens. This feature prevents hotspots in food, providing a superior cooking experience. Additionally, the inclusion of an energy-saving mode significantly reduces power consumption, aligning with sustainable practices in kitchen management.

Safety is prioritized in both models, featuring built-in mechanisms such as a child lock, overheat protection, and a safety interlock that ensures the microwave operates only when the door is securely closed.

In terms of design, Toastmaster has ensured that both the MBT240 and MBT208 are built to withstand the rigors of professional use. Their durable construction and thoughtful engineering make them not only reliable but also easy to incorporate into existing workflows in commercial kitchens.

In conclusion, the Toastmaster MBT240 and MBT208 stand out with their powerful performance, innovative technologies, and user-centered features. Whether for busy restaurants or home enthusiasts, these microwaves offer the versatility and efficiency needed to elevate any culinary experience.