INSTALLATION
To install the handle clips to the basket:
1.Place the basket on a firm, flat surface.
2.With the narrow side of the handle clip on the inside of the basket, snap the handle clip to the recessed area in the basket.
3.Once the inside surface snaps in place, continue the process by rolling the handle clip slightly outward and pressing down firmly to snap onto the outside surface. If installed incorrectly, the handle clip will not lay flat.
DOOR REMOVAL
If door must be removed:
•Unplug the unit or switch the breaker that supplies power to the unit to the
off position.
•Remove the plastic top hinge cover.
•Hold the door in place while removing the top hinge from the cabinet.
•Remove the two 3/8” hex head bolts from the top hinge with a 3/8” wrench or socket.
•Lift the door upwards and pull up and away from the cabinet until free of the bottom hinge pin mounted on the front of the cabinet.
•To replace the door, reverse the above procedures and securely tighten all screws to prevent hinge slippage.
CAUTION
Doors are heavy. Two people are recommended to remove or replace the door assembly from the cabinet.
Hinge Cover
Hinge Bolts (2)
Hinge Plate
8