Frigidaire FPHB2899PF Valve Inlet, To Connect Water Supply Line To Ice Maker Inlet Valve

Page 14

CONNECTING THE WATER SUPPLY

To Connect Water Supply Line To Ice Maker Inlet Valve

1Disconnect refrigerator from electric power source.

2 Place end of water supply line into sink or bucket.

Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shutoff valve.

3 Remove plastic cap from water valve inlet and discard cap.

4 If you use copper tubing - Slide brass compression nut, then ferrule (sleeve) onto water supply line. Push water supply line into water valve inlet as far as it will go (¼ inch/6.4 mm). Slide ferrule (sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten. See Figure 1.

If you use stainless steel tubing - The nut and ferrule are already assembled on the tubing. Slide compression nut onto valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten. See Figure 1.

5 With steel clamp and screw, secure water supply line (copper tubing only) to rear panel of refrigerator as shown.

6 Coil excess water supply line (copper tubing only), about 2½ turns, behind refrigerator as shown and arrange coils so they do not vibrate or wear against any other surface. Do not kink tubing.

7 Turn ON water supply at shutoff valve and tighten any connections that leak.

8 Reconnect refrigerator to electrical power source.

9 To turn ice maker on, lower wire signal arm (freezer ice maker) or set the ice maker’s On/Off power switch to the “On” position (fresh food ice maker).

Plastic Water Tubing

Steel

to Ice Maker

Clamp

Fill Tube

Brass

 

 

Compression

 

Nut

 

Ferrule

 

(Sleeve)

 

Water Line

 

Water Valve

 

Bracket

 

Valve Inlet

 

Water Valve

Water line from household water supply

(Include enough tubing in loop to allow moving refrigerator out for cleaning.)

Figure 1

IMPORTANT

After connecting the water supply, refer to “How to Prime the Water Supply System” for important information about priming an empty water supply system.

Your refrigerator’s water supply system includes several tubing lines, a water filter, a water valve, and a water tank. To ensure that your water dispenser works properly, this system must be completely filled with water when your refrigerator is first connected to the household water supply line.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Use &Care Important Safety Instructions Installation ChecklistElectrical information Child SafetyProper Disposal of your Refrigerator or Freezer Risk of child entrapmentFeatures AT a Glance Features may vary according to modelLocation InstallationInstallation Door openingTo level the freezer drawer Level Refrigerator & Adjust DoorsIf necessary Guidelines for final positioning of your refrigeratorTo adjust the door stop To adjust the flipper mullion Loosen the screw located on the flipper mullion hingeTo prepare for removing the doors Door Removal InstructionsGetting through narrow spaces To remove the top hinge coversRemoving Freezer Drawer Installing Freezer DrawerDrawer is heavy. Use caution when lifting Installing Door Handles Door Handle Mounting Instructions for Frigidaire GalleryInstalling Door Handles Connecting the Water Supply Before Installing The Water Supply Line, You Will NeedValve Inlet To Connect Water Supply Line To Ice Maker Inlet ValveControls Alarms Sabbath ModeSetting cooling temperatures Door AjarPriming the water supply system Using the ice maker after installationAutomatic ICE & Water Dispenser Ice maker operation & careRemove and empty the ice bin if Cleaning the ice makerIce maker/dispenser tips Turning the ice maker on and off Automatic ICE Maker FreezerQuick Ice Function Ice maker tipsDrawers Storage FeaturesShelf features CrispersStorage bins DoorsDeli drawer Removable Can DispenserTo Remove Lower Basket Freezer Features varies by modelTo Remove Upper Basket Dividers RemovalIdeas for saving energy Storing Food and Saving EnergyIdeas for storing foods Normal Operating Sounds and Sights Understanding the sounds you may hearChanging the Filter Ordering replacement filters Replacing your PureAdvantageTM air filterVacation and moving tips Care & CleaningProtecting your investment Installing the Ice Chute Extension Care and cleaning tipsRemoving the Ice Chute Extension For Cleaning Part Cleaning Agents Tips and PrecautionsTo replace LED Lights Ordering Replacement LED LightsReplacing LED Lights select models LED LightConcern Potential Cause Common Solution Before YOU CallWater DOORS/DRAWERSRunning of Refrigerator Major Appliance Warranty Exclusions

FPHB2899PF, FGHF2366PF, FGHB2866PF specifications

The Frigidaire FPHB2899PF, FGHB2866PF, and FGHF2366PF represent a trio of innovative refrigerator models designed to enhance the modern kitchen experience. Each of these appliances is packed with unique features and technologies that prioritize efficiency, convenience, and style.

The FPHB2899PF is a standout model that offers a sleek design combined with cutting-edge functionality. One of its key features is the adjustable shelving, which allows users to customize the interior space according to their storage needs. Moreover, the SpaceWise organization system includes a variety of bins and dividers that help keep food items neatly arranged and easily accessible. This model also boasts a full-width deli drawer, ideal for storing meats, cheeses, and other deli items at optimal temperatures.

The FGHB2866PF model takes innovation a step further with its advanced cooling technology. Equipped with the Even Temp cooling system, this refrigerator maintains consistent temperatures throughout the fresh food compartment, reducing the likelihood of food spoilage. Its ice and water dispenser delivers filtered ice and water right from the door, providing easy access to refreshments while minimizing energy consumption.

Another notable feature of the FGHB2866PF is its external LED display, which allows users to quickly check the temperature settings and other functions without having to open the door. Additionally, it comes with a variety of storage options, including adjustable door bins and a humidity-controlled crisper drawer that ensures fruits and vegetables remain fresh for longer periods.

Lastly, the FGHF2366PF is a top-freezer refrigerator that combines traditional design with modern efficiency. It features a bright LED interior lighting that illuminates the entire interior, making it easy to locate items. The adjustable shelving provides flexibility, while the dual humidity crispers help maintain the freshness of produce.

Each of these Frigidaire models incorporates Energy Star certification, ensuring not only lower energy bills but also an environmentally friendly option for consumers. Their stylish stainless steel finishes enhance the aesthetics of any kitchen decor, making them not only functional but also visually appealing.

In conclusion, the Frigidaire FPHB2899PF, FGHB2866PF, and FGHF2366PF models represent a perfect blend of design, technology, and practicality, catering to diverse consumer needs and preferences. Whether it's the customizable storage options, advanced cooling technologies, or energy-efficient operation, each refrigerator offers something special for every kitchen.
Top Page Image Contents