Frigidaire FFHS2322MQ, FFUS2613LM, FFUS2613LE Locating the Filter, Replacing the Water Filter

Page 18

CHANGING THE FILTER

Locating the Filter

Your refrigerator is equipped with a water filtering system. The water filter system filters all dispensed drinking water, as well as the water used to produce ice.

Water Filter

The water filter is located at the top right side of the fresh food compartment.

Replacing the Water Filter

In general, you should change the water filter every six months to ensure the highest possible water quality. Water Filter Status on the user interface prompts you to replace the filter after a standard amount of water

(200 gallons/757 liters for PureSource 3TM) has flowed through the system.

If your refrigerator has not been used for a period of time (during moving for example), change the filter before reinstalling the refrigerator.

Ordering Replacement Filters

To order your replacement filters, please visit our online store at www.frigidaire.com/store, by calling toll-free at 877-808-4195, or by visiting the dealer where you purchased your refrigerator. Electrolux recommends that you order extra filters when you first install your refrigerator, and that you replace your filters at least once every six months.

Here are the product numbers to request when ordering:

PureSource 3TM

Water Filter

Part #WF3CB

More about your Advanced Water Filter

The PureSource 3TM ice and water filter system is tested and certified to NSF/ANSI Standards

42 and 53 for the reduction of claims specified on the performance data sheet.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

Test & certification results:

•Rated Capacity - 200 gallons/757 liters for PureSource 3TM ice and water filter

•Rated service flow - .50 gallons per minute

•Operating Temp.: Min. 33°F, Max. 100°F

•Maximum Rated Pressure - 100 pounds per square inch

•Recommended Minimum Operating Pressure: 30 pounds per square inch

To replace your PureSource 3TM water filter:

It is not necessary to turn the water supply off to change the filter. Be ready to wipe up any small amounts of water released during the filter replacement.

1Turn Off the ice maker.

2Remove the filter by pushing on the end/face of the filter.

3Slide the old water filter cartridge straight out of the housing and discard it.

4Unpackage the new filter cartridge. Using the alignment guide, slide it gently into the filter housing until it stops against the snap-in connector at the back of the housing.

5Push firmly until the cartridge snaps into place (you should hear a click as the cartridge engages the snap-in connector).

6Press a drinking glass against the water dispenser while checking for any leaks at the filter housing.

Any spurts and sputters that occur as the system purges air out of the dispenser system are normal.

7After filling one glass of water, continue flushing the system for about four (4) minutes.

8Turn On the ice maker.

9Press and hold the Water Filter button on the Ice & Water Dispenser control panel for three seconds. When the display changes from “Red” to “Green,” the status has been reset.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Use &Care Important Safety Instructions Installation ChecklistElectrical information Child SafetyProper Disposal of your Refrigerator or Freezer Risk of child entrapmentFeatures At a Glance Features may vary according to modelSpillSafe Adjustable Shelf Toe Grille Installation and Removal InstallationInstallation LocationDoor Opening To level the cabinet using the front rollersTo level the doors using the adjustable lower hinge Guidelines for final positioning of your refrigeratorTo prepare for removing the doors Door Removal Instructions Getting through narrow spacesRequired Tools To remove the refrigerator top hinge coverDoor Removal Instructions To remove the freezer top hinge coverTo remove the freezer door Connecting the Water Supply Before Installing The Water Supply Line, You Will NeedTo Connect Water Supply Line To Ice Maker Inlet Valve Cool Down Period Temperature adjustmentControls Refrigerator & freezer controlsSetting Cooling Temperatures Allowing Cooling Time Before UseNumeric Display Cooling System On/Off Button Indicator Turning the Cooling system on and offStorage Features Amber Automatic Ice & Water DispenserGreen RedIce Water To prime the water supply system Using the Ice Maker after InstallationPriming the Water Supply System Ice Maker Operation & CareIce Maker/Dispenser Tips Cleaning the Ice MakerTo clean the ice maker Remove and empty the ice storage bin ifWater Filter Ordering Replacement FiltersLocating the Filter Replacing the Water FilterNormal Operating Sounds and sights Understanding the Sounds you may HearCare & Cleaning Care & Cleaning TipsBefore You Call United States CanadaCompressor does not Digital temperatureSee Problem column OPENING/CLOSING RunMajor appliance warranty Exclusions This warranty does not cover the following

FFHS2322MM, FFHS2322MQ, FFUS2613LP, FFUS2613LE, FFUS2613LM specifications

The Frigidaire FFUS2613LP, FFUS2613LM, FFHS2322MM, FFHS2322MQ, and FFUS2613LE are standout appliances in the realm of refrigerators, packed with features and technologies designed to enhance user experience and convenience.

Starting with the FFUS2613LP and FFUS2613LM, these models feature a sleek, side-by-side design that not only maximizes storage space but also offers easy access to both refrigerated and frozen items. The adjustable shelves allow for personalized organization, accommodating various sizes of containers and ensuring efficient use of space. These units utilize advanced cooling technologies, including a cooling system that maintains a consistent temperature, thereby preserving the freshness of food for longer periods.

Both models come equipped with an exterior ice and water dispenser, providing easy access to icy cold water and fresh ice without having to open the fridge door. This feature helps minimize temperature fluctuations, further contributing to energy efficiency. Additionally, their energy-efficient design is compliant with ENERGY STAR standards, making them environmentally friendly options that help reduce electricity bills.

The FFHS2322MM and FFHS2322MQ models also offer impressive features, such as a spacious interior layout and additional storage options like door bins and humidity-controlled crisper drawers. These crisper drawers are particularly notable for their ability to maintain optimal humidity levels for fruits and vegetables, helping to extend their freshness.

The FFHS2322 series also integrates advanced filtration technology that ensures water and ice are not only cold but also free from impurities. The easy-to-replace water filter makes maintaining clean water simple and hassle-free. Both models emphasize user-friendly controls, allowing for straightforward adjustments to temperature settings and filter changes.

Finally, the FFUS2613LE is renowned for its unique fingerprint-resistant finish, which helps keep the surface looking clean and polished without the need for constant wiping. This model also showcases similar features to its counterparts, such as energy-efficient cooling and versatile shelving.

In conclusion, Frigidaire combines innovative technology with practical design in the FFUS2613LP, FFUS2613LM, FFHS2322MM, FFHS2322MQ, and FFUS2613LE refrigerators. Their advanced features, including customizable storage, water filtration, and energy efficiency, make them ideal appliances for any modern kitchen, catering to the needs of diverse households while prioritizing sustainability and convenience.
Top Page Image Contents