Connecting the Water Supply

WARNING

To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator from electrical power before connecting a water supply line to the refrigerator.

•A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type shutoff valve.

•Do not re-use compression fitting or use thread seal tape.

•A compression nut and ferrule (sleeve) for connecting a copper water supply line to the ice maker inlet valve.

CAUTION

To Avoid Property Damage:

•Copper or Stainless Steel braided tubing is recommended for the water supply line. Water supply tubing made of ¼ inch plastic is not recommended to be used. Plastic tubing greatly increases the potential for water leaks, and the manufacturer will not be responsible for any damage if plastic tubing is used for the supply line.

•DO NOT install water supply tubing in areas where temperatures fall below freezing.

•Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft water, ensure that the softener is maintained and working properly.

IMPORTANT

Ensure that your water supply line connections comply with all local plumbing codes.

Before Installing The Water Supply Line, You Will Need:

•Basic Tools: adjustable wrench, flat-blade screwdriver, and PhillipsTM screwdriver

•Access to a household cold water line with water pressure between 30 and 100 psi.

•A water supply line made of ¼ inch (6.4mm) OD, copper or stainless steel tubing. To determine the length of tubing needed, measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).

NOTE

Check with your local building authority for recommendations on water lines and associated materials prior to installing your new refrigerator. Depending on your local/ state building codes, Frigidaire recommends for homes with existing valves its Smart Choice® water line kit 5305513409 (with

a 6 ft. Stainless Steel Water Line) and for homes without an existing valve, Frigidaire recommends its Smart Choice® water line kit 5305510264 (with a 20 ft. copper water line with self-tapping saddle valve). Please refer to www.frigidaire.com/store for more information.

To Connect Water Supply Line To Ice Maker Inlet Valve

1Disconnect refrigerator from electric power source.

2Place end of water supply line into sink or bucket. Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shutoff valve.

3Remove plastic cap from water valve inlet and discard cap.

4If you use copper tubing - Slide brass compression nut, then ferrule (sleeve) onto water supply line. Push water supply line into water valve inlet as far as it will go (¼ inch/6.4 mm). Slide ferrule

(sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten. See Figure 1.

If you use stainless steel tubing - The nut and ferrule are already assembled on the tubing. Slide compression nut onto valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten. See Figure 2.

FFSS2614QP specifications

The Frigidaire FFSS2614QP is a standout appliance in the world of refrigeration, expertly designed to offer both style and functionality. This versatile side-by-side refrigerator provides ample space for storing groceries and perishables, making it a perfect fit for families or individuals who value organization and accessibility in their kitchen.

One of the main features of the FFSS2614QP is its generous capacity. With a total of 25.5 cu. ft., it offers plenty of room to store fresh foods, frozen items, and beverages. The side-by-side configuration allows for easy access to both the refrigerator and freezer sections, with adjustable shelves that provide flexible storage options. The easy-access shelf design ensures that every item is within reach, eliminating the need to rummage through clutter to find what you need.

The refrigerator comes equipped with modern cooling technologies, including the Even Temp cooling system. This innovative technology helps maintain consistent temperatures throughout the refrigerator, minimizing fluctuations that can affect food freshness. The Express-Select controls make it simple to adjust settings and monitor temperatures, ensuring that your food stays perfectly stored.

Another noteworthy characteristic of the FFSS2614QP is its Energy Star certification. This certification signifies that the appliance meets strict energy efficiency guidelines, helping users save on utility bills while also being eco-friendly. The refrigerator features LED lighting, which not only illuminates the interior but also consumes less energy compared to traditional incandescent bulbs.

Additionally, the FFSS2614QP includes built-in ice and water dispensers, providing convenience and refreshing hydration at your fingertips. The water filter ensures that the water is clean and tastes great, while the ice maker saves you the hassle of filling trays.

With a sleek design and streamlined exterior, the Frigidaire FFSS2614QP complements various kitchen styles, enhancing the overall aesthetic. The stainless steel finish offers durability and easy maintenance, resisting smudges and fingerprints.

In summary, the Frigidaire FFSS2614QP is more than just a refrigerator; it’s an essential kitchen companion characterized by generous storage, energy efficiency, modern cooling technologies, and stylish design. Whether you are storing fresh produce, leftovers, or frozen meals, this side-by-side refrigerator is designed to meet your storage needs while enhancing your kitchen's functionality.