INSTALLATION

REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed

Adjustable wrench

Slip joint pliers

#2 Phillips screwdriver

Basin wrench (optional)

Tools needed

Remove parts from carton. Check that all parts are included.

All models:

Faucet assembly

Plastic base

⁵⁄₆₄" (2 mm) Allen wrench

Model series KKFV01SP & KKFV01PP:

Weights

Check valve assembly

2 fiber seals

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

Check location where faucet will be installed. Proper installation is your responsibility. Make sure you have everything necessary for correct installation. It is the responsibility of the installer to comply with installation specifications and with state and local plumbing codes. Protect faucet and water lines leading to faucet against freezing. Damage from freezing is not covered by the warranty.

Faucet requires a 1³⁄₈" (3.5 cm) diameter opening in sink or countertop. If hole is not available for mounting it is recommended that a qualified installer be contacted to drill the hole for your installation in a sink deck or countertop. Thickness of sink or countertop hole must not exceed 1³⁄₄"

(4.4 cm).

Hot and cold water supply lines must be available and if they are not it is recommended that a qualified plumber install the necessary piping.

Faucet hoses are equipped with compression type seals and do not require sealing compounds to prevent leaking.

As with all metal objects, follow proper handling techniques.

It is recommended that a qualified plumber/installer install the faucet. The faucet installation must comply with national and local plumbing codes and ordinances.

The faucet should be examined for damage prior to installation. Do not install a damaged faucet. Instead, return the faucet to the dealer from whom you purchased it. Failure to do so will void the warranty.

INSTALLATION

INSTRUCTIONS

1.Before installing the faucet, flush water supply pipes thoroughly. Shut off water supply valves.

2.Remove nut, metal washer and rubber washer from faucet. Do not remove rubber o-ring in bottom of faucet base.

A

B

C

A. Rubber washer

B. Metal washer

C.Nut

3.Feed tubing through hole in sink or countertop and then insert faucet assembly into hole.

4.Reinstall the parts onto the threaded shank of the faucet in the following order: rubber washer, plastic base, metal washer and nut. Hand-tighten nut.

A

B

C

D

A. Rubber washer

B. Plastic base

B. Metal washer

C.Nut

5.Align faucet and securely hand-tighten the nut to prevent faucet base from turning when moving operating lever. For Model series KKFV01SP and KKFV01PP, be sure the control lever is pointed toward the right side of the sink.

2

Page 2
Image 2
KitchenAid KKFV01LP, KKFV01SP, KKFV01PP installation instructions Installation Requirements, Installation Instructions

KKFV01LP, KKFV01PP, KKFV01SP specifications

The KitchenAid KKFV01 series, encompassing models KKFV01LP, KKFV01SP, and KKFV01PP, brings a versatile and modern approach to the realm of food processing. These high-performance kitchen appliances are designed to cater to a variety of culinary needs, making them a valuable addition to any kitchen.

One of the standout features of this series is its powerful motor which ranges up to 350 watts, ensuring efficient blending and processing. This strength is complemented by a robust collection of stainless steel blades which effortlessly handle a variety of ingredients, from soft fruits to dense vegetables. The blades are designed for optimal slicing, dicing, and mixing, significantly reducing prep time.

The designs of the KKFV01 models prioritize user comfort and convenience. Each model is equipped with an ergonomic handle that ensures a secure grip while operating. Additionally, the compact footprint of these appliances means they take up minimal counter space, making them ideal for kitchens of any size. Each model also features a stylish aesthetic, available in various colors, allowing users to choose one that complements their kitchen’s décor.

Technological advancements are evident in the easy-to-use control panel, which offers multiple speed settings and a pulse function for precise control over the texture of food being prepared. Whether you are looking to create a smooth puree or a chunky salsa, these settings provide the flexibility needed for diverse recipes.

Another important characteristic of the KKFV01 series is its easy-to-clean design. Most components are removable and dishwasher-safe, reducing the hassle typically associated with cleaning kitchen appliances.

In terms of versatility, these models can handle a wide range of tasks, from blending smoothies and soups to chopping herbs and nuts. With an included recipe book, users can quickly get started on a variety of culinary adventures.

In conclusion, the KitchenAid KKFV01LP, KKFV01SP, and KKFV01PP models exemplify the blend of power, convenience, and style that KitchenAid is known for. They are perfect for both novice cooks and seasoned chefs looking to enhance their cooking experience. Their thoughtful design and powerful performance make them essential tools for culinary creativity.