KitchenAid KKFV01SP, KKFV01PP, KKFV01LP Operation, Cleaning, default water setting

6.Model series KKFV01SP and KKFV01PP only: Connect the sprayer hose to the supply hose using the check valve assembly and fiber seals. Be sure the check valve assembly is positioned correctly; the arrow should be pointing down away from the faucet. Insert a fiber seal between sprayer hose and check valve assembly and attach them. Insert a fiber seal between the check valve assembly and supply hose and attach them.

A

B

C

D

E

A. Supply hose

B. Fiber seal

C. Check valve

D. Fiber seal

E. Sprayer hose

7.Connect the red-striped braided hose to the hot water supply valve. Connect the blue-striped braided hose to the cold water supply valve. Be sure to hold the supply hoses in place when tightening the nut to prevent the hoses from twisting.

8.Model series KKFV01SP and KKFV01PP only: Be sure the sprayer hose is fully inserted into the faucet body. Under the sink, use the screws provided to attach the weight(s) onto the sprayer hose on the spout side of the hose loop, just above the bend in the hose.

For model series KKFV01PP attach one weight. For model series KKFV01SP attach both weights.

A

B

A.Weight

B.Spray hose

9.Move the faucet lever to the closed (forward) position and open supply valves. Check connections for leaks.

10.Remove aerator from faucet and flush the hot and cold lines until water is clear.

The aerator is in the end of the faucet. Loosen with a wrench to remove.

11.Reinstall the aerator into faucet after flushing the water lines and tighten with a wrench.

OPERATION

full hot

full on

full cold

off

Model series KKFV01PP:

■The flow of water can be a stream or spray. A stream is the

default water setting. spray

■Change to spray by pushing the diverter button on top of the spray assembly.

■ Change to stream by shutting the faucet off. The spray assembly automatically resets.

■ The spray assembly can be drawn approximately 20 inches out of the faucet spout.

Model series KKFV01SP:

■The flow of water can be a stream or spray. A stream is the default water setting.

■Change to spray by pushing the large diverter button on top of the spray

assembly.spray

■ Change to stream by pushing the small	stream
diverter button just below the large
button or by shutting the faucet off.

■The spray assembly can be drawn approximately 20 inches out of the faucet spout.

Cleaning

Aerator:

The aerator should be removed periodically and cleaned out under running water. If it is very dirty it should be put in common household vinegar and allowed to soak overnight. Reinstall and tighten with a wrench.

Chrome faucet:

model series KKFV01SP

A

A. aerator

Use liquid cleansers or soapy water. Polish with a soft cloth.

NOTE: Anti-lime or acidic cleansers such as scouring agents or abrasive sponges are to be avoided.

Stainless Steel faucet:

Use a cloth and clean water or a very diluted washing liquid. Polish with a soft cloth.

NOTE: Anti-lime or acidic cleansers such as scouring agents or abrasive sponges are to be avoided.

3