Frigidaire FSC23BBDSB0, FSC23F7DB0 manual Before Installing The Water Supply Line, You Will Need

Page 5

Installation - Connecting Ice Maker To Water Supply

To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator from electrical power before connecting a water supply line to the refrigerator.

To Avoid Property Damage:

•Copper tubing is recommended for the water supply line. Water supply tubing made of ¼” plastic is not recommended since it greatly increases the potential for water leaks. Manufacturer will not be responsible for any damage if plastic tubing is used for supply line.

•DO NOT install water supply tubing in areas where temperatures fall below freezing.

•Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft water, ensure that the softener is maintained and working properly.

IMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes.

Before Installing The Water Supply Line, You Will Need

•Basic Tools: adjustable wrench, flat-blade screwdriver, and PhillipsTM screwdriver

•Access to a household cold water line with water pressure between 20 and 100 psi.

•A water supply line made of ¼ inch (6.4 mm) OD, copper tubing. To determine the length of copper tubing needed, you will need to measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).

•A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type shutoff valve.

•A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.

NOTE: Water line kit number 5303917950, available from your appliance dealer at additional cost, contains 25 feet (7.6 meters) of ¼ inch OD copper tubing, a saddle type shutoff valve (nonpiercing), (2) ¼ inch brass compression nuts, (2) ferrules/sleeves, and instructions for installing a water supply line.

To Connect Water Supply Line To Ice Maker Inlet Valve

1. Disconnect refrigerator from electric power source.

2. Place end of water supply line into sink or bucket. Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shut off valve.

3. Unscrew plastic cap from water valve inlet and discard cap.

4. Slide brass compression nut, then ferrule (sleeve) onto water supply line, as shown.

5. Push water supply line into water valve inlet as far as it will go (¼ inch). Slide ferrule (sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten.

6. With steel clamp and screw, secure water supply line to rear panel of refrigerator as shown.

7.Coil excess water supply line (about 2½ turns) behind refrigerator as shown and arrange coils so they do not vibrate or wear against any other surface.

8. Turn ON water supply at shutoff valve and tighten any connections that leak.

9. Reconnect refrigerator to electrical power source.

10. Make sure ice maker power switch is turned On (See page 14 for location of power switch).

IMPORTANT: It takes approximately 24 hours for the ice maker to begin producing ice. Air in new plumbing lines may cause ice maker to cycle two or three times before making a full tray of ice. New plumbing may cause ice to be discolored or have poor flavor. Discard ice made during the first 24 hours.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 241540300 Please Read and Save These Instructions Welcome & CongratulationsFor Your Safety Important Safety InstructionsChild Safety Proper Disposal of Your Refrigerator or FreezerInstallation To Connect Water Supply Line To Ice Maker Inlet Valve Before Installing The Water Supply Line, You Will NeedDoor Removal Instructions Door Removal InstructionsTo Remove Refrigerator Door To Remove Freezer DoorFeatures At a Glance Temperature Adjustment Temperature ControlsIf Temperature Displays Flash Cool Down PeriodTurning the Cooling System on and OFF Other Control FeaturesDoor Ajar Indicator To adjust cantilever shelves Cantilever Shelf AdjustmentLooking Inside ICE Cream Shelf Some ModelsDoor Storage Adjustable Door BinsTall Bottle Retainer Some Models Special Item Rack Some ModelsMeat Keeper Humidity Control Some ModelsAutomatic ICE & Water Dispenser Operating Instructions Automatic Ice and Water DispenserHow the Water Dispenser Works ICE and Water Dispenser FeaturesHow the Ice Dispenser Works ICE Dispenser TipsRemove and empty the ice storage bin if Cleaning the ICE DispenserTo change filter Changing the FilterSystem Startup PureSource2TM * Ice and Water Front Filter some modelsChanging the Filter To change filterEnergy Saving Ideas Food Storage & Energy Saving IdeasFood Storage Ideas Normal Operating Sounds & Sights Care & Cleaning Chart Care & CleaningReplacing Light Bulbs Vacation and Moving TipsRefrigerator Warranty Warranty InformationBefore You Call Problem Cause CorrectionProblem Cause Correction ICE Dispenser Problem Cause Correction

FSC23F7DB0, FSC23BBDSB0, FSC23F7DSB1, FSC23F7DSB0, FSC23BBDSB1 specifications

Frigidaire has long been synonymous with innovation and quality in the appliance industry, and their line of refrigerators including the FSC23BBDSB1, FSC23F7DSB0, FSC23F7DSB1, FSC23BBDSB0, and FSC23F7DB0 exemplifies these qualities.

These models showcase a modern, sleek design, perfect for any contemporary kitchen. One of the primary features is spacious storage capacity, allowing homeowners to organize their groceries conveniently. With adjustable shelving and door bins, users can customize the interior layout based on their needs.

Energy efficiency is another hallmark of these Frigidaire models. Each unit is designed with energy-saving technologies that not only help reduce electricity bills but also promote sustainable living. The ENERGY STAR rating on these refrigerators highlights their commitment to energy efficiency, making them an eco-friendly choice for the environmentally conscious consumer.

In terms of temperature management, these refrigerators feature advanced cooling systems that ensure consistent temperatures throughout the unit. This is crucial in maintaining the freshness of food and beverages. The models come equipped with an automatic defrost feature, minimizing the need for manual intervention and ensuring optimal performance.

The stainless steel finish gives the refrigerators a premium look, while also being easy to clean and resistant to fingerprints. This aesthetic appeal is matched by practicality, as the units often include LED lighting that illuminates the interior, making it easier to locate items even in low light.

Technology is also a standout aspect of the FSC23 series. Many of these models feature smart capabilities, allowing users to control and monitor their refrigerators remotely. Whether adjusting temperatures, receiving alerts about issues, or managing grocery inventory, modern connectivity enhances user convenience.

Additionally, these refrigerators often come with specialized compartments, such as humidity-controlled crispers for fruits and vegetables, as well as dedicated meat drawers, ensuring food stays fresh for longer periods.

Overall, the Frigidaire FSC23 series represents a blend of style, efficiency, and advanced technology, making them an excellent choice for anyone in the market for a reliable and stylish refrigerator. With a commitment to quality and innovation, Frigidaire continues to set benchmarks in the home appliance industry.
Top Page Image Contents