Black Box EME149D-60 manual Multi-users and Groups Setup 3.4.1 Group Setup, Installation, Page

Chapter 3: Installation

5.After the ServSensor reboots, the page shown in Figure 3-11 appears. Click “Browse” and navigate to the firmware file you downloaded, then click “Upgrade.”

Figure 3-11. Upgrade button.

6. During the process, you will see the messages shown in Figure 3-12.

Figure 3-12. Upgrade Status screen.

7. The unit will then reboot. The process is complete when the LEDs are back to their “normal” status.

3.4 Multi-users and Groups Setup

3.4.1 Group Setup

1.Log in to the ServSensor V4E Lite with the Administrator password. The default will be “public” if you have not changed this yet.

2.Click on the Settings page, then System Adminstrator, then User & Group Management as shown in Figure 3-13.

NOTE: The following screen diagrams may appear small and hard to read. Please use the zoom feature in your PDF reader program to increase the size of the page to better view these screen diagrams.

EME149A-20 724-746-5500 blackbox.com Page 25