Chapter 2: Overview
|
| Table |
Number | Component | Description |
7 | Expansion ports | Use the four expansion ports numbered |
|
| expansion module (EME1X8) and/or the 16 |
|
| (EME1DC16). |
8 | (120) LED indicators | There are two LEDs (Status and Online) for each dry contact. |
2.3.4 |
|
|
|
|
Figure |
|
|
|
|
19 | 11 | 12 | 13 | 14 |
|
|
|
| 16 |
|
|
|
| 17 |
| 19 | 18 | 9 | 15 | 10 |
| Figure |
|
|
| |
| Table |
|
|
| |
Number | Component | Description |
|
|
|
8 | (8) | Use these ports to connect Intelligent Sensors to the ServSensor V4E Lite. | |||
9 | Barrel connector | This is a | |||
10 | Mic out connector | Connect an external microphone for voice modem applications. | |||
11 | Audio in | Connect an external microphone. |
|
|
|
12 | Audio out | Connect the output for external speakers. |
|
| |
13 | USB Type A port | Use the USB 1.1 port to connect a USB GBarPRS/GSM compatible modem, | |||
|
| a USB |
|
| |
14 | The ServSensor V4E Lite supports Modbus master or slave. |
| |||
15 | Use this | ||||
16 | Reset | Press this button to reset the ServSensor V4E Lite. |
|
| |
17 | EXT GND | Use the EXT. GND connector to externally ground the unit. |
| ||
18 | (60) dry contacts | (60) VAC dry contacts |
|
|
|
Page 11 | ||
|
|