Black Box EME149D-20, EME149D-60, EME149A-20, EME149A-60 Notifications, Page, 8. Select the sensor

Chapter 4: Notifications

5.Select the sensor and SNMP trap parameters (see Figures 4-8 and 4-9). First, click on the board that the sensor is attached to and then select the sensor and click “Next.”

Figure 4-8. Select the sensor.

6. Select the status that you want to issue the notification for, select the action type, then click “Finish.”

Figure 4-9. Select the SNMP parameters.

7. The SNMP trap has been added to the Notifications page.

Page 56 724-746-5500 blackbox.com EME149A-20