∗Frontl ∗Frontr | JVC RX-8020VBK manual

*Initial setting

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

To change the transmittable signals for operating another manufacturer’s DVD player

2 Press DVD.

“CALL” appears on the remote control display window.

See the following list to find the code.

After pressing DVD or DVD MULTI, you can perform the following operations on the DVD player:

3 PLAY	:Start playing.
4	:Return to the beginning of the
	current (or previous) chapter.
¢	:Skip to the beginning of the next
	chapter.
7 STOP	:Stop playing.
8 PAUSE	:Pause playing. To resume press
	3 PLAY.

After pressing DVD or DVD MULTI,		∗FRONT•L	∗FRONT•R
these buttons can be used for the		2	3
DVD menu operations.	TEST	∗CENTER	MENU
	TEST	∗CENTER	∗SUBWFR
Note:	4	5	6
Note:		ENTER
		∗SURR•L
For detailed menu operations, refer to		∗SURR•L
For detailed menu operations, refer to		8
the instructions supplied with the

discs or the DVD player.

Note:

Refer also to the manual supplied with your DVD player.

5.Try to operate your DVD player by pressing one of the above buttons.

•DO NOT forget to turn on the DVD player before pressing one of the above buttons.

If there are more than one code listed for your brand of

DVD, try each one until the correct one is entered.

*Initial setting

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

JVC RX-8020VBK manual ∗Frontl ∗Frontr