JVC RX-8020VBK manual English

4. Repeat step 3 until you finish putting a performer name (up to 32 characters).

To insert a space, press 5 / ∞

/ 2 / 3 to move to , then press SET.

To correct an incorrect character:

1)Press 5 / ∞ / 2 / 3 to move to + or =, then press SET until the incorrect character is selected.

2)Press 5 / ∞ / 2 / 3 to move to , then press SET to erase the character.

3)Press 5 / ∞ / 2 / 3 to move in front of the correct character, then press SET to enter the correct character.

5.Press 5 / ∞ / 2 / 3 to

move to “DISC 1: MICHAEL (in this example),” then press SET.

The TITLE INPUT/DISC

TITLE screen appears.

For the MD recorder:

You can write the disc information (disc title and song titles) onto the disc. You can only write the song title for the song currently selected.

•If you have the CD-MD combination deck, you can also enter the disc information (its performer, disc title, and its music genre) of normal audio CDs into the memory built in the CD-MD combination deck. (To do this, follow the procedure of “For the CD Player with the disc memory function” on page 47.)

•If you change the disc or song title with more than 32 characters, the characters following 32nd will be erased from the title.

1. Press TEXT DISPLAY while “MD” is selected as the source.

The Disc Information screen appears on the TV.

2. Press 5 or ∞ to move to “TITLE INPUT,”

then press SET.

The DISC TITLE INPUT screen appears.

English

6. Enter the disc title, referring to steps 3 and 4.

• If the current CD is a CD Text, go to the next step without entering the disc title.

7. Press 5 / ∞ / 2 / 3 to move to “DISC 1: MY FAVORITE (in this example),” then press SET.

The TITLE INPUT/DISC 1

GENRE screen appears.

8. Press 5 or ∞ to move to the genre you want, then press SET.

The Disc Information screen appears again.

To show the unseen genres, press 5 or ∞ until they appear.

3. Enter the title, referring to steps 3 and 4 of “For the CD Player with the disc memory function.”

• You can enter up to 32 characters for the disc title.

4. Press 5 / ∞ / 2 / 3 to move to the disc title you have just entered, then press SET.

The disc title is stored into the memory and the SONG TITLE INPUT screen for the currently selected song appears.

•You can enter a song title for the song currently selected.

5.Enter the song title, referring to steps 3 and 4 of “For the CD Player with the disc memory function.”

•You can enter up to 32 characters for the song title.

6.Press 5 / ∞ / 2 / 3 to move to the song title you have just entered, then press SET.

The song title is stored into the memory and the Disc Information screen appears again.

48