JVC RX-8020VBK Adjusting the Equalization Patterns, 0dB is the initial setting for each frequency

English

Adjusting the Equalization Patterns

—DIGITAL EQ

You can adjust the equalization patterns to your preference.

•Once you have made adjustment, it is memorized for each source.

Using the on-screen display (through the remote control]:

2.Press CONTROL UP 5 or DOWN ∞ repeatedly to adjust the

frequency level.

The DIGITAL EQ indicator lights up on the display.

•The frequency level changes from –8 dB to +8 dB in 2 dB steps.

CONTROL

DOWN UP

1.Show DIGITAL EQ (Equalization) menu (see page 38).

2.Press 5 or ∞ to move to the frequency you want to adjust.

3.Press 2 or 3 to adjust the frequency level you

want.

The DIGITAL EQ indicator lights up on the display.

•The frequency level changes from –8 dB to +8 dB in 2 dB steps.

4.Repeat steps 2 and 3 to adjust the other frequency levels.

5.When you finish, press EXIT repeatedly until the menu disappears from the TV.

To flat the equalization pattern,

set all the frequency levels to “0dB” in step 3. The DIGITAL EQ indicator goes off from the display.

On the front panel:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1. Press DIGITAL EQ (Equalization)	DIGITAL	LEV
repeatedly to select the frequency you	EQ	ADJU
want to adjust.

•Each time you press the button, the frequency with its current level changes as follows:

EQ 63Hz EQ250Hz EQ 1kHz

and its level and its level and its level

EQ16kHz	EQ 4kHz
and its level	and its level

•“0dB” is the initial setting for each frequency.

3.Repeat steps 1 and 2 to adjust the other frequency levels.

To flat the equalization pattern,

set all the frequency levels to “0dB” in step 2. The DIGITAL EQ indicator goes off from the display.

From the remote control:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

1. Press SOUND. SOUND

“SOUND” appears on the remote control display window.

•The 10 keys are activated for sound adjustments.

2. Press DIGITAL EQ (Equalization)	∗DIGITALEQ
repeatedly to select the frequency you	10
	RETURN
want to adjust.

“EQ” appears on the remote control display window.

•Each time you press the button, the frequency with its current level changes as follows:

EQ 63Hz	EQ250Hz		EQ 1kHz
and its level	and its level		and its level
EQ16kHz		EQ 4kHz
and its level		and its level

• “0dB” is the initial setting for each frequency.

3. Press LEVEL + or − repeatedly	+
to adjust the frequency level.
The DIGITAL EQ indicator lights up on	CH/∗LEVEL
the display.	−

•The frequency level changes from

–8 dB to +8 dB in 2 dB steps.

4.Repeat steps 2 and 3 to adjust the other frequency levels.

To flat the equalization pattern,

set all the frequency levels to “0dB” in step 3. The DIGITAL EQ indicator goes off from the display.

Notes:

•When Analog Direct is in use, the digital equalization patterns cannot be adjusted.

•The digital equalization patterns affect the front speaker sounds only.

39