JVC RX-8020VBK manual Setting the Digital Input Digital in Terminals

English

6Setting the Digital Input (DIGITAL IN) Terminals

[On-screen display] [Front panel]

When you use the digital input terminals, you have to register which components you have connected to the digital input terminals.

7Digital coaxial terminal—DIGITAL 1 (DGTL COAX 1)

Set the component connected to the digital coaxial terminal

(DIGITAL IN 1)—DVD, MD**, CDR, TV (or DBS*) or CD.

*If you have changed the source name from “TV” to “DBS,” “DBS” appears (see page 17).

**If you want to connect an MD recorder to the digital input terminal, change the source name to “MD” from “TAPE” (see page 17).

7Digital optical terminals—DIGITAL 2, DIGITAL 3 and

DIGITAL 4

Set the components connected to the digital optical terminals (DIGITAL IN 2 – 4).

•Each time you press 2 or 3 on the remote control or CONTROL UP 5 or DOWN ∞ on the front panel, the digital component names change as follows:

When “DIGITAL 1 (DGTL COAX 1)” is set to “DVD”

2: CD 3: TV (or DBS* ) 4: CDR	“
2: CD 3: TV (or DBS*) 4: MD**	“
2: CD 3: MD** 4: CDR	“
2: MD** 3: TV (or DBS* ) 4: CDR	“
(back to the beginning)

When “DIGITAL 1 (DGTL COAX 1)” is set to “MD”**

2: CD 3: TV (or DBS*) 4: CDR	“
2: CD 3: TV (or DBS*) 4: DVD	“
2: CD 3: DVD 4: CDR	“
2: DVD 3: TV (or DBS*) 4: CDR	“
(back to the beginning)

When “DIGITAL 1 (DGTL COAX 1)” is set to “CDR”

2: CD 3: TV (or DBS*) 4: DVD	“
2: CD 3: TV (or DBS*) 4: MD**	“
2: CD 3: MD** 4: DVD	“
2: MD** 3: TV (or DBS*) 4: DVD	“
(back to the beginning)

When “DIGITAL 1 (DGTL COAX 1)” is set to “TV” or “DBS”*

2: CD 3: DVD 4: CDR “2: CD 3: DVD 4: MD** “

2:CD 3: MD** 4: CDR “ 2: MD** 3: DVD 4: CDR “ (back to the beginning)

When “DIGITAL 1 (DGTL COAX 1)” is set to “CD”

2: DVD 3: TV (or DBS*) 4: CDR	“
2: DVD 3: TV (or DBS*) 4: MD**	“
2: DVD 3: MD** 4: CDR	“
2: MD** 3: TV (or DBS*) 4: CDR	“
(back to the beginning)

*If you have changed the source name from “TV” to “DBS,” “DBS” appears (see page 17).

**If you want to connect an MD recorder to the digital input terminal, change the source name to “MD” from “TAPE” (see page 17).

Note:

When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components:

–DIGITAL 1 (coaxial): For DVD player

–DIGITAL 2 (optical): For CD player

–DIGITAL 3 (optical): For digital TV broadcast tuner

–DIGITAL 4 (optical): For CD recorder

7Setting the Component Video Input

When you use the component video inputs for the DVD player and/ or DBS tuner, you have to register the type of input jacks.

Without setting this correctly, you cannot view the correct input on the TV.

7For the DVD player—VIDEO DVD

[On-screen display] [Front panel]

Select one of the following:

COMPONENT	: Select this when connecting the DVD
(COMPNT)	player to the component video input jacks.
S/C	: Select this when connecting the DVD
	player to the composite video or S-video
	input jacks.

7For the DBS tuner—VIDEO DBS

[On-screen display] [Front panel]

Select one of the following:

COMPONENT	: Select this when connecting the DBS
(COMPNT)	tuner to the component video input jacks.
S/C	: Select this when connecting the DBS tuner
	to the composite video or S-video input
	jacks.

Note:

If you have not selected appropriate video input jacks, the AV COMPU LINK remote control system cannot operate properly. (See page 49.)

25