Frigidaire 242046800 Controls Sabbath Mode, Setting cooling temperatures, Alarms

Page 15

Setting cooling temperatures

1Down "” and Up "” indicators are located beside the displayed temperatures.

2Press the "” or "” indicator to adjust the temperature to the desired setting.

The temperature display will begin to blink with the first touch. After five (5) seconds of inactivity, the display will beep to accept the new temperature. After 10 seconds, the display times out and returns to the basic display.

Alarms

Door Ajar If the door has been left open for an extended period of time, an alarm will sound and the door ajar indicator will illuminate on the display. Press the alarm reset key to reset any system alarms.

High Temp In the event of a high temperature condition, the temperature display will blink and display “HI”. After 20 minutes, the high temp alert will be illuminated. Press alarm reset to acknowledge the alarm, at which time the highest temperature reached will be displayed and the refrigerator will resume normal operation. All other modes are turned off until the alarm is acknowledged.

Power Fail In the event of a power failure, the power fail alert will be illuminated. Press alarm reset to acknowledge the alarm. Other modes may be turned off until the alarm is acknowledged. When the power fail alert is acknowledged, the refrigerator will resume normal op- eration. The high temp alarm may also be illuminated until a safe operating range temperature has been reached.

Controls

Sabbath Mode

The Sabbath Mode is a feature that disables portions of the refrigerator and its controls in accordance with observance of the weekly Sabbath and religious holidays within the Orthodox Jewish community.

Sabbath Mode is turned ON and OFF by pressing and holding both the freezer “” and refrigerator “” indicators for five (5) seconds. The display shows “Sb” while in Sabbath mode.

In the Sabbath Mode, the High Temp alarm is active for health reasons. If a high temperature alarm is activated during this time, for example due to a door left ajar, the alarm will sound intermittently for about 10 minutes. The alarm will then silence on its own and a red

high temperature icon will display. The high temp icon will continue to display, even if the door is closed, until the Sabbath mode is exited and the icon reset. The refrigerator will function normally once the door is closed, without any violation of the Sabbath/Holidays.

For further assistance, guidelines for proper usage and a complete list of models with the Sabbath feature, please visit the web at http:\\www.star-k.org.

NOTE

While in Sabbath Mode, neither the lights, dispenser, nor the control panel will work until Sabbath Mode is deactivated.

Refrigerator stays in Sabbath Mode after power failure recovery. It must be deactivated with the buttons on the control panel.

NOTE

Although you have entered the Sabbath Mode, the ice maker will complete the cycle it had already initiated. The ice cube compartment will remain cold and new ice cubes can be made with standard trays.

15

Image 15
Contents Use &Care Installation Checklist Important Safety InstructionsRisk of child entrapment Child SafetyProper Disposal of your Refrigerator or Freezer Electrical informationFeatures may vary according to model Features At a GlanceRequired Tools InstallationLocation Door openingGuidelines for final positioning of your refrigerator Level Refrigerator & Adjust DoorsTo level the cabinet using the front rollers select models If necessaryTo adjust the door stop To adjust the flipper mullion To remove the refrigerator doors Door Removal Instructions Getting through narrow spacesTo prepare for removing the doors To remove the top hinge coversInstalling Freezer Drawer Door Removal InstructionsRemoving Freezer Drawer Mounting Refrigerator Handles Mounting Freezer Handle  Note Connecting the Water Supply Before Installing The Water Supply Line, You Will NeedTo Connect Water Supply Line To Ice Maker Inlet Valve Controls Controls Sabbath Mode Setting cooling temperaturesAlarms Using the ice maker after installation Ice maker operation & careTurning the ice maker on and off Cleaning the ice maker Automatic Ice & Water DispenserIce maker/dispenser tips Crispers Storage FeaturesShelf features DrawersTall bottle retainer DoorsStore-MoreTMDrawer Storage binsTo Remove Lower Basket Freezer Features varies by modelRemovable Can Dispenser To Remove Upper BasketLift up on the rear of the lower divider and pull out Ideas for saving energy Storing food and saving energy Ideas for storing foods Note Replacing the Water Filter Ordering Replacement FiltersLocating the Filters Water FilterOrdering replacement filters Air filterReplacing your PureAdvantageTM air filter Care & Cleaning Protecting your investment Care & Cleaning Care and cleaning tipsVacation and moving tips To replace LED Lights Care & Cleaning Replacing LED Lights select modelsOrdering Replacement LED Lights Replacing Light Bulbs select modelsUnited States Canada Before You CallRunning of Refrigerator Exclusions This warranty does not cover the following Major appliance warranty

242046800 specifications

The Frigidaire 242046800 is a high-quality refrigerator component that stands out for its essential role in enhancing your appliance's efficiency and performance. Designed specifically to cater to a variety of refrigerator models, this part is a testament to Frigidaire's commitment to reliability and innovation in home appliances.

One of the main features of the Frigidaire 242046800 is its compatibility with a wide range of Frigidaire refrigerators. This versatility makes it an ideal replacement part for customers seeking a solution to enhance their appliance's functionality without the need for extensive modifications. This component is engineered to fit seamlessly into most Frigidaire models, ensuring easy installation and a hassle-free replacement process.

The 242046800 is designed with high durability in mind. Constructed from robust materials, it provides longevity and resilience under regular use. This durability translates into a longer lifespan for your refrigerator, helping to maintain optimal performance over time and reducing the frequency of replacement needs. Frigidaire prioritizes quality in its manufacturing processes, which is evident in the construction of the 242046800.

In terms of technology, the Frigidaire 242046800 utilizes innovative design principles to enhance energy efficiency. By optimizing the interaction between various refrigerator components, it helps reduce energy consumption, which can lead to cost savings on utility bills. This is particularly important in today’s eco-conscious world, where energy efficiency plays a vital role in both financial and environmental impact.

Another notable characteristic of the 242046800 is its ability to regulate temperature effectively. It contributes to maintaining an even temperature throughout the refrigerator, which is essential for food preservation. This feature aids in reducing food spoilage and ensures that ingredients stay fresh for longer periods.

Furthermore, the design of the Frigidaire 242046800 facilitates quiet operation. Many users appreciate a refrigerator that operates silently, minimizing distractions in the kitchen and providing a more pleasant environment.

In conclusion, the Frigidaire 242046800 offers a combination of compatibility, durability, energy efficiency, effective temperature regulation, and quiet operation. As a crucial component in Frigidaire refrigerators, it helps ensure that your appliance runs smoothly and efficiently, making it a wise investment for any homeowner looking to enhance their kitchen experience. With this part, users can expect reliable performance and long-lasting service, hallmark traits associated with the Frigidaire brand.