Frigidaire 242046800 Locating the Filters, Replacing the Water Filter

Page 24

CHANGING THE FILTER

Locating the Filters

Your refrigerator is equipped with water filtering system. The water filter system filters all dispensed drinking water, as well as the water used to produce ice.

Water Filter

The water filter is located at the top right side of the fresh food compartment.

Replacing the Water Filter

In general, you should change the water filter every six months to ensure the highest possible water quality. Water Filter Status on the user interface prompts you to replace the filter after a standard amount of water (200 gallons/757 liters for PureSource UltraTM) has flowed through the system.

If your refrigerator has not been used for a period of time (during moving for example), change the filter before reinstalling the refrigerator.

Ordering Replacement Filters

To order your replacement filters, please visit our online store at www.frigidaire.com/store, by calling toll-free at 877-808-4195, or by visiting the dealer where you purchased your refrigerator. Frigidaire recommends that you order extra filters when you first install your refrigerator, and that you replace your filters at least once every six months.

Here is the product number to request when ordering:

PureSource UltraTM Water Filter

Part #ULTRAWF

More about your Advanced Water Filter

The PureSource UltraTM ice and water filter system is tested and certified to NSF/ANSI Standards 42 and 53 for the reduction of claims specified on the performance data sheet.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

Test & certification results:

•Rated Capacity - 200 gallons/757 liters for PureSource UltraTM ice and water filter

•Rated service flow - .50 gallons per minute

•Operating Temp.: Min. 33°F, Max. 100°F

•Maximum Rated Pressure - 100 pounds per square inch

•Recommended Minimum Operating Pressure: 30 pounds per square inch

To replace your PureSource UltraTM water filter:

It is not necessary to turn the water supply off to change the filter. Be ready to wipe up any small amounts of water released during the filter replacement.

1Turn Off the ice maker power switch.

2Remove the filter by pushing on the end/face of the filter.

3Slide the old water filter cartridge straight out of the housing and discard it.

4Unpackage the new filter cartridge. Using the alignment guide, slide it gently into the filter housing until it stops against the snap-in connector at the back of the housing.

5Push firmly until the cartridge snaps into place (you should hear a click as the cartridge engages the snap-in connector).

6Press a drinking glass against the water dispenser while checking for any leaks at the filter housing.

Any spurts and sputters that occur as the system purges air out of the dispenser system are normal.

7After filling one glass of water, continue flushing the system for about four minutes.

8Turn On the ice maker.

9Press and hold the Water Filter button on the Ice & Water Dispenser control panel for three seconds. When the display changes from Red to Green, the status has been reset.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Use &Care Important Safety Instructions Installation ChecklistChild Safety Proper Disposal of your Refrigerator or FreezerElectrical information Risk of child entrapmentFeatures At a Glance Features may vary according to modelInstallation LocationDoor opening Required ToolsLevel Refrigerator & Adjust Doors To level the cabinet using the front rollers select modelsIf necessary Guidelines for final positioning of your refrigeratorTo adjust the door stop To adjust the flipper mullion Door Removal Instructions Getting through narrow spaces To prepare for removing the doorsTo remove the top hinge covers To remove the refrigerator doorsInstalling Freezer Drawer Door Removal InstructionsRemoving Freezer Drawer Mounting Refrigerator Handles Mounting Freezer Handle  Note Connecting the Water Supply Before Installing The Water Supply Line, You Will NeedTo Connect Water Supply Line To Ice Maker Inlet Valve Controls Controls Sabbath Mode Setting cooling temperaturesAlarms Using the ice maker after installation Ice maker operation & careTurning the ice maker on and off Cleaning the ice maker Automatic Ice & Water DispenserIce maker/dispenser tips Storage Features Shelf featuresDrawers CrispersDoors Store-MoreTMDrawerStorage bins Tall bottle retainerFreezer Features varies by model Removable Can DispenserTo Remove Upper Basket To Remove Lower BasketLift up on the rear of the lower divider and pull out Storing food and saving energy Ideas for storing foods Ideas for saving energy Note Ordering Replacement Filters Locating the FiltersWater Filter Replacing the Water FilterOrdering replacement filters Air filterReplacing your PureAdvantageTM air filter Care & Cleaning Protecting your investment Care & Cleaning Care and cleaning tipsVacation and moving tips Care & Cleaning Replacing LED Lights select models Ordering Replacement LED LightsReplacing Light Bulbs select models To replace LED LightsBefore You Call United States CanadaRunning of Refrigerator Major appliance warranty Exclusions This warranty does not cover the following

242046800 specifications

The Frigidaire 242046800 is a high-quality refrigerator component that stands out for its essential role in enhancing your appliance's efficiency and performance. Designed specifically to cater to a variety of refrigerator models, this part is a testament to Frigidaire's commitment to reliability and innovation in home appliances.

One of the main features of the Frigidaire 242046800 is its compatibility with a wide range of Frigidaire refrigerators. This versatility makes it an ideal replacement part for customers seeking a solution to enhance their appliance's functionality without the need for extensive modifications. This component is engineered to fit seamlessly into most Frigidaire models, ensuring easy installation and a hassle-free replacement process.

The 242046800 is designed with high durability in mind. Constructed from robust materials, it provides longevity and resilience under regular use. This durability translates into a longer lifespan for your refrigerator, helping to maintain optimal performance over time and reducing the frequency of replacement needs. Frigidaire prioritizes quality in its manufacturing processes, which is evident in the construction of the 242046800.

In terms of technology, the Frigidaire 242046800 utilizes innovative design principles to enhance energy efficiency. By optimizing the interaction between various refrigerator components, it helps reduce energy consumption, which can lead to cost savings on utility bills. This is particularly important in today’s eco-conscious world, where energy efficiency plays a vital role in both financial and environmental impact.

Another notable characteristic of the 242046800 is its ability to regulate temperature effectively. It contributes to maintaining an even temperature throughout the refrigerator, which is essential for food preservation. This feature aids in reducing food spoilage and ensures that ingredients stay fresh for longer periods.

Furthermore, the design of the Frigidaire 242046800 facilitates quiet operation. Many users appreciate a refrigerator that operates silently, minimizing distractions in the kitchen and providing a more pleasant environment.

In conclusion, the Frigidaire 242046800 offers a combination of compatibility, durability, energy efficiency, effective temperature regulation, and quiet operation. As a crucial component in Frigidaire refrigerators, it helps ensure that your appliance runs smoothly and efficiently, making it a wise investment for any homeowner looking to enhance their kitchen experience. With this part, users can expect reliable performance and long-lasting service, hallmark traits associated with the Frigidaire brand.
Top Page Image Contents