Frigidaire 242046800 Storing food and saving energy Ideas for storing foods

Page 22

storing food and saving energy

Ideas for storing foods

Fresh food storage

•Keep the fresh food compartment between 34° F and 40° F with an optimum temperature of 37° F.

•Avoid overcrowding the refrigerator shelves, which reduces air circulation and causes uneven cooling.

Fruits and vegetables

•Store fruits and vegetables in crisper drawers, where trapped moisture helps preserve food quality for longer time periods.

•Wash items and remove excess water.

•Wrap any items that have strong odors or high moisture content.

Meat

•Wrap raw meat and poultry separately and securely to prevent leaks and contamination of other foods or surfaces.

•Use the deli drawer to store meat/poultry for short- term storage. Any meat to be kept longer than two

(2) days should be frozen.

Frozen food storage

•Keep the freezer compartment at 0° F or lower.

•A freezer operates most efficiently when it is at least 2/3 full.

Packaging foods for freezing

•To minimize food dehydration and quality deterioration, use aluminum foil, freezer wrap, freezer bags, or airtight containers. Force as much air out of the packages as possible and seal them tightly. Trapped air can cause food to dry out, change color, and develop an off-flavor (freezer burn).

•Wrap fresh meats and poultry with suitable freezer wrap prior to freezing.

•Do not refreeze meat that has completely thawed.

•Avoid adding too much warm food to the freezer at one time. This overloads the freezer, slows the rate of freezing, and can raise the temperature of frozen foods.

•Leave a space between packages, so cold air can circulate freely, allowing food to freeze as quickly as possible.

Ideas for saving energy

Installation

•Locate the refrigerator in the coolest part of the room, out of direct sunlight, and away from heating ducts or registers.

•Do not place the refrigerator next to heat- producing appliances such as a range, oven, or dishwasher. If this is not possible, a section of cabinetry or an added layer of insulation between the two (2) appliances will help the refrigerator operate more efficiently.

•Level the refrigerator so that the doors close tightly.

Temperature settings

•Refer to the “Controls” section for procedures on temperature settings.

Food storage

•Avoid overcrowding the refrigerator or blocking cold air vents. Doing so causes the refrigerator to run longer and use more energy.

•Cover foods and wipe containers dry before placing them in the refrigerator. This cuts down on moisture build-up inside the unit.

•Organize the refrigerator to reduce door openings.

Remove as many items as needed at one time and close the door as soon as possible.

•Do not place a hot container directly on a cold shelf. Remember, such an extreme temperature change may damage the glass.

Loading the freezer

•Prior to grocery shopping, activate “quick freeze” so that on your return you can ensure your newly purchased food designated for the freezer will be preserved as quickly as possible.

•Activating “quick freeze” also will help your freezer more efficiently maintain the selected temperature after placing new purchases with pre-existing frozen foods.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Use &Care Important Safety Instructions Installation ChecklistElectrical information Child SafetyProper Disposal of your Refrigerator or Freezer Risk of child entrapmentFeatures At a Glance Features may vary according to modelDoor opening InstallationLocation Required ToolsIf necessary Level Refrigerator & Adjust DoorsTo level the cabinet using the front rollers select models Guidelines for final positioning of your refrigeratorTo adjust the door stop To adjust the flipper mullion To remove the top hinge covers Door Removal Instructions Getting through narrow spacesTo prepare for removing the doors To remove the refrigerator doorsDoor Removal Instructions Installing Freezer DrawerRemoving Freezer Drawer Mounting Refrigerator Handles Mounting Freezer Handle  Note Before Installing The Water Supply Line, You Will Need Connecting the Water SupplyTo Connect Water Supply Line To Ice Maker Inlet Valve Controls Setting cooling temperatures Controls Sabbath ModeAlarms Ice maker operation & care Using the ice maker after installationTurning the ice maker on and off Automatic Ice & Water Dispenser Cleaning the ice makerIce maker/dispenser tips Drawers Storage FeaturesShelf features CrispersStorage bins DoorsStore-MoreTMDrawer Tall bottle retainerTo Remove Upper Basket Freezer Features varies by modelRemovable Can Dispenser To Remove Lower BasketLift up on the rear of the lower divider and pull out Storing food and saving energy Ideas for storing foods Ideas for saving energy Note Water Filter Ordering Replacement FiltersLocating the Filters Replacing the Water FilterAir filter Ordering replacement filtersReplacing your PureAdvantageTM air filter Care & Cleaning Protecting your investment Care and cleaning tips Care & CleaningVacation and moving tips Replacing Light Bulbs select models Care & Cleaning Replacing LED Lights select modelsOrdering Replacement LED Lights To replace LED LightsBefore You Call United States CanadaRunning of Refrigerator Major appliance warranty Exclusions This warranty does not cover the following

242046800 specifications

The Frigidaire 242046800 is a high-quality refrigerator component that stands out for its essential role in enhancing your appliance's efficiency and performance. Designed specifically to cater to a variety of refrigerator models, this part is a testament to Frigidaire's commitment to reliability and innovation in home appliances.

One of the main features of the Frigidaire 242046800 is its compatibility with a wide range of Frigidaire refrigerators. This versatility makes it an ideal replacement part for customers seeking a solution to enhance their appliance's functionality without the need for extensive modifications. This component is engineered to fit seamlessly into most Frigidaire models, ensuring easy installation and a hassle-free replacement process.

The 242046800 is designed with high durability in mind. Constructed from robust materials, it provides longevity and resilience under regular use. This durability translates into a longer lifespan for your refrigerator, helping to maintain optimal performance over time and reducing the frequency of replacement needs. Frigidaire prioritizes quality in its manufacturing processes, which is evident in the construction of the 242046800.

In terms of technology, the Frigidaire 242046800 utilizes innovative design principles to enhance energy efficiency. By optimizing the interaction between various refrigerator components, it helps reduce energy consumption, which can lead to cost savings on utility bills. This is particularly important in today’s eco-conscious world, where energy efficiency plays a vital role in both financial and environmental impact.

Another notable characteristic of the 242046800 is its ability to regulate temperature effectively. It contributes to maintaining an even temperature throughout the refrigerator, which is essential for food preservation. This feature aids in reducing food spoilage and ensures that ingredients stay fresh for longer periods.

Furthermore, the design of the Frigidaire 242046800 facilitates quiet operation. Many users appreciate a refrigerator that operates silently, minimizing distractions in the kitchen and providing a more pleasant environment.

In conclusion, the Frigidaire 242046800 offers a combination of compatibility, durability, energy efficiency, effective temperature regulation, and quiet operation. As a crucial component in Frigidaire refrigerators, it helps ensure that your appliance runs smoothly and efficiently, making it a wise investment for any homeowner looking to enhance their kitchen experience. With this part, users can expect reliable performance and long-lasting service, hallmark traits associated with the Frigidaire brand.
Top Page Image Contents