Automatic Ice & Water Dispenser

Priming the Water Supply System

Your refrigerator’s water supply system includes several tubing lines, an advanced water filter, a distribution valve bank, and a reserve tank to ensure ample supply to the ice and water dispenser at all times. This system needs to be completely filled with water when first connected to an external supply line.

CAUTION

For proper dispenser operation, recommended water supply pressure should fall between 30 psi and 100 psi. Excessive pressure may cause water filter to malfunction.

To prime the water supply system:

1Begin filling the tank by pressing and holding a drinking glass against the water dispenser paddle.

2Keep the glass in this position until water comes out of the dispenser. It may take about 1½ minutes.

3Continue dispensing water for about four minutes to flush the system and plumbing connections of any impurities (stopping to empty the glass as necessary).

IMPORTANT

Your ice maker is turned on at the factory so it can work as soon as you install your refrigerator. If you cannot connect a water supply, turn the ice maker’s On/Off switch to Off. Otherwise, the ice maker’s fill valve may make a loud chattering noise when it attempts to operate without water.

Turning the Ice Maker On and Off

Ice production is controlled by the ice maker’s On/Off power switch. To gain access to the ice maker, pull the extra shelf out (some models). Press the switch to the “O” position to turn it Off and press to the “I” position to turn it On.

	ON
OFF	OFF	ON
Wire	Wire
Wire	Signal Arm
Signal Arm

NOTE

The water dispenser has a built-in device that shuts off the water flow after three minutes of continuous use. To reset this shutoff device, simply release the dispenser paddle.

NOTE

The ice maker also has a built-in wire signal arm, that automatically stops ice production when the ice bin is full. This signal arm should not be used to manually stop the ice maker.

Ice Maker Operation & Care

The ice maker, ice bin, and dispenser feeding mechanism are located in the top of the freezer compartment. After the refrigerator is installed properly and has cooled for several hours, the ice maker can produce ice within 24 hours. It can completely fill an ice bin in about two days.

The ice maker produces four to six pounds of ice every 24 hours depending on usage conditions. Ice is produced at a rate of eight cubes every 75 to 90 minutes.

Using the Ice Maker after Installation

Before making ice for the first time, be sure to prime the water supply system. Air in new plumbing lines can result in two or three empty ice maker cycles. Furthermore,

if the system is not flushed, the first ice cubes may be discolored or have an odd flavor.

IMPORTANT

Small ice cubes or ice chips jamming in the ice maker may be a sign that your water filter needs changing. If you have a side mounted ice maker you may also experience hollow cubes partially frozen cubes with water inside. When these cubes are harvested, they break open and spill water over the other ice cubes in the ice container, forming a solid mass of ice. As the water filter nears the end of its useful life and becomes clogged with particles, less water is delivered to the ice maker during each cycle. The ice maker can’t fill every cube in the ice maker mold, leading to small cubes

or chips that can get caught between the ice ejector blades and the stripper. Remember, if your ice maker is jamming with small ice cubes or it’s been six months or longer since you last changed your water filter replace the water filter with a new one. Poor quality household water may require the filter to be changed more frequently.

242063600 specifications

The Frigidaire 242063600 is a highly efficient refrigerator water filter that provides a convenient solution for ensuring clean and safe drinking water. Designed for compatibility with various Frigidaire and Electrolux refrigerators, this water filter is a reliable choice for improving the quality of water dispensed from your refrigerator.

One of the key features of the Frigidaire 242063600 is its advanced filtration technology. This filter utilizes a multi-stage filtration process that effectively reduces contaminants from water, including chlorine, lead, and other impurities. This helps to enhance the taste and odor of the water, making it not only safe to drink but also refreshing.

The installation process of the Frigidaire 242063600 is designed to be user-friendly. It features a simple "push-pull" design that allows users to easily replace the filter without the need for specialized tools. This ease of installation ensures that homeowners can quickly access filtered water without the hassle of complicated setups.

In terms of lifespan, the Frigidaire 242063600 water filter generally lasts for approximately six months, depending on the frequency of use and the quality of the water being filtered. Regular replacement of the filter is crucial to maintaining optimal performance and ensuring continued water purity. The filter is also designed to provide a flow rate that is sufficient for everyday use, ensuring that you won't run out of clean water when you need it the most.

Another characteristic of this water filter is its eco-friendly design. By choosing a water filter over bottled water, consumers can significantly reduce plastic waste and minimize their environmental footprint. The Frigidaire 242063600 aligns with this trend by providing a sustainable alternative for families looking to maintain access to clean water while being mindful of their impact on the planet.

Incorporating the Frigidaire 242063600 into your refrigerator not only promotes healthier drinking habits but also contributes to a more sustainable lifestyle. With its impressive filtration capabilities, straightforward installation, and environmental benefits, this water filter is a valuable addition for anyone seeking enhanced water quality at home.