Frigidaire 242063600 Door Opening, Guidelines for final positioning of your refrigerator

Page 6

Installation

Door Opening

NOTE

The refrigerator doors are designed to shut by themselves within a 20 degree opening.

Your refrigerator should be positioned to allow easy access to a counter or table when removing food. For best use of drawers and freezer baskets, the refrigerator should be in a position where both the refrigerator and freezer doors can be fully opened.

Guidelines for final positioning of your refrigerator:

All four corners of the cabinet must rest firmly on the floor.

The cabinet should be level at the front and rear.

The sides should tilt ¼ inch (6 mm) from front to back (to ensure that doors close and seal properly).

Doors should align with each other and be level.

All of these conditions can be met by raising or lowering the adjustable front rollers.

To level the cabinet using the front rollers:

1Open both doors and remove the toe grille (see “Toe Grille Installation and Removal” in the “Installation” section).

2Close the doors and use a flat-blade screwdriver or

3/8 inch socket wrench to raise or lower the front rollers.

3Ensure both doors are bind-free with their seals touching the cabinet on all four sides.

To level the doors using the adjustable lower hinge (some models):

1Before leveling either door, remove set screw that locks door height into position. (The door cannot be adjusted without set screw removed).

2If the refrigerator door is lower than the freezer door, raise the refrigerator door by turning the adjustment screw clockwise using a 7/16 inch wrench. (See illustration.)

3If the freezer door is lower than the refrigerator door, raise the freezer door by turning the adjustment screw clockwise using a 7/16 inch wrench. (See illustration.)

4After leveling, verify door stop contacts lower hinge and top of door does not contact upper hinge through full movement of door (from fully closed to fully open).

5Reinstall set screw, locking the door height.

 

 

Open Door

7/16” Wrench

 

 

and 3/32” Hex Key

Door Stop

 

(some models)

 

Flange

Hinge

 

 

 

 

 

Flange

 

 

Set Screw

 

 

(some models)

 

 

Hinge

6Replace the toe grille by fitting it into place

(see “Toe Grille Installation and Removal” in the “Installation” section).

6

Image 6
Contents Use &Care Important Safety Instructions Installation ChecklistElectrical information Child SafetyProper Disposal of your Refrigerator or Freezer Risk of child entrapmentFeatures At a Glance Features may vary according to modelSpillSafe Adjustable Shelf Toe Grille Installation and Removal InstallationInstallation LocationTo level the cabinet using the front rollers Door OpeningGuidelines for final positioning of your refrigerator To prepare for removing the doors Door Removal Instructions Getting through narrow spacesRequired Tools To remove the refrigerator top hinge coverDoor Removal Instructions To remove the freezer top hinge coverTo remove the freezer door Connecting the Water Supply Before Installing The Water Supply Line, You Will NeedTo Connect Water Supply Line To Ice Maker Inlet Valve Setting Cooling Temperatures ControlsUser Interface Filter reset Light on-off On / OffEnheit to Celsius Storage Features Automatic Ice & Water Dispenser Ice Maker/Dispenser Tips Cleaning the Ice MakerTo clean the ice maker Remove and empty the ice storage bin ifWater Filter Ordering Replacement FiltersLocating the Filters Replacing the Water FilterNormal Operating Sounds and sights Understanding the Sounds you may HearCare & Cleaning Care & Cleaning TipsBefore You Call United States CanadaSee Problem column OPENING/CLOSING Digital temperatureSee Problem column OPENING/CLOSING Walls Compressor does notMajor appliance warranty Exclusions This warranty does not cover the following

242063600 specifications

The Frigidaire 242063600 is a highly efficient refrigerator water filter that provides a convenient solution for ensuring clean and safe drinking water. Designed for compatibility with various Frigidaire and Electrolux refrigerators, this water filter is a reliable choice for improving the quality of water dispensed from your refrigerator.

One of the key features of the Frigidaire 242063600 is its advanced filtration technology. This filter utilizes a multi-stage filtration process that effectively reduces contaminants from water, including chlorine, lead, and other impurities. This helps to enhance the taste and odor of the water, making it not only safe to drink but also refreshing.

The installation process of the Frigidaire 242063600 is designed to be user-friendly. It features a simple "push-pull" design that allows users to easily replace the filter without the need for specialized tools. This ease of installation ensures that homeowners can quickly access filtered water without the hassle of complicated setups.

In terms of lifespan, the Frigidaire 242063600 water filter generally lasts for approximately six months, depending on the frequency of use and the quality of the water being filtered. Regular replacement of the filter is crucial to maintaining optimal performance and ensuring continued water purity. The filter is also designed to provide a flow rate that is sufficient for everyday use, ensuring that you won't run out of clean water when you need it the most.

Another characteristic of this water filter is its eco-friendly design. By choosing a water filter over bottled water, consumers can significantly reduce plastic waste and minimize their environmental footprint. The Frigidaire 242063600 aligns with this trend by providing a sustainable alternative for families looking to maintain access to clean water while being mindful of their impact on the planet.

Incorporating the Frigidaire 242063600 into your refrigerator not only promotes healthier drinking habits but also contributes to a more sustainable lifestyle. With its impressive filtration capabilities, straightforward installation, and environmental benefits, this water filter is a valuable addition for anyone seeking enhanced water quality at home.