Frigidaire 242063600 Door Removal Instructions, To remove the freezer top hinge cover

Door Removal Instructions

To remove the freezer top hinge cover:

1Remove the two screws from each cover over the top door hinges.

2Lift hinge cover straight up and off.

To remove the freezer door:

3Detach the water tube from the connector located below the freezer door. The connector releases when you press its outer sleeve inward.

Adjustable Hinge (some models)

1Detach the multi-wire cable connector located above the top hinge. Grasp both sides of the connector firmly and pull apart.

2Trace lightly around the hinge with a pencil. This makes reinstallation easier.

Non-Adjusting Hinge (some models)

4Remove the screws from the top hinge and pull the multi-wire cable through it. Lift the door off of the bottom hinge.

5Remove the two bottom hinge screws and hinge if necessary.

6Lay the door on its side to avoid damage to the water tube extending from the bottom hinge.

To reinstall the freezer door, reverse the above steps.

Once both doors are in place, ensure they are aligned with each other and level (Please see “To level the doors using the lower hinge” for models with adjustable lower hinges or “To level the cabinet using the front rollers” for models with the non-adjustable lower hinges in the “Installation” section.), then replace the top hinge cover.

8