Frigidaire LI30KC/316902495 manual Install Range Hood Ducted version, Install Vent System

Page 10

PREPARE THE LOCATION

Style 3 - Cut Openings for 3¼” x 10” (8.3 x 25.4 cm) Rectangular Vent Transition to Round Vent

Roof Venting

To make a circular vent opening on the underside of the cabinet top:

1.Mark a centerline on the underside of the top of cabinet. .Mark a line 5” (12.7 cm) from the back wall on the

underside of the top of cabinet.

.Use a compass or a circle template to draw a circle with a diameter of 7½” (19 cm).

Use saber or keyhole saw to cut the circular vent

opening.Centerline Ø 7½”

(19 cm)

*5”

(12.7 cm)

Cabinet cutouts

*From wall, not cabinet frame

Style 4 - Cut Openings for 7” (17.8 cm) Round Vent to Round Vent Transition

Roof Venting

To make a circular vent opening on the underside of the cabinet top:

NOTE: The 7” round transition kit, part number 5304487139, is required for this installation.

1.Mark a centerline on the underside of the top of cabinet. .Mark a line 5” (12.7 cm) from the back wall on the

underside of the top of cabinet.

.Use a compass or a circle template to draw a circle with a diameter of 7½” (19 cm).

Use saber or keyhole saw to cut the circular vent opening.

4.Repeat steps 1-3 for the underside of the top of the

cabinet.

*Ø 7½”

Centerline

 

(19 cm)

 

 

 

*

*5”

 

(12.7 cm)

Cabinet

 

*

cutouts

 

*From wall, not

 

cabinet frame

 

Install Vent System

1.Install vent through the vent opening in upper cabinet or wall. Complete venting system according to the selected venting method. See “Venting Requirements” section.

.Use caulking to seal exterior wall or roof opening around the cap.

INSTALL RANGE HOOD (Ducted version)

NOTE

Your model will have a 3¼” x 10” (8.3 x 25.4 cm) rectangular vent connector on the inside of the range hood.

1.Unpack the 3¼” x 10” (8.3 x 25.4 cm) rectangular vent from the inside of your range hood. To detach the vent connector, remove the 2 installation screws

(.35x .95cm) and keep the screws in a safe place to reinstall later (see Step 5).

A. 3¼” x 10” (8.3 x 25.4 cm) rectangular vent damper

A

 

B. 3.5 x 9.5 mm screws

 

B

.Lift the range hood up under cabinet and determine final location by centering beneath cabinet. Mark on the underside of cabinet the location of the 4 keyhole mounting slots on the range hood (See slot dimensions on page 6). Set range hood aside on a covered surface.

A

A

A. Keyhole slot

10

Image 10
Contents USA Canada LI30KC May/13 Product Record and Registration Contents Important Safety Instructions Read all instructions before using this applianceFire Department List of Materials List of Materials Electrical RequirementsCabinet Dimensions Product DimensionsFor Mobile Home Installations Location RequirementsMakeup Air Cold Weather InstallationsVenting Requirements Venting MethodsDetermine Wiring Hole Location Prepare the LocationWall Venting To wire through topTo wire through wall Style 1 Recirculating Hood versionInstall Range Hood Ducted version Install Vent SystemPower Supply Cable Installation Installing the HoodDo not reconnect power until the installation is complete Electrical Shock Hazard Disconnect power before servicing Installing the Hood Make Electrical ConnectionComplete Installation Range Hood Controls Range Hood USERecirculation Vent Cover Operating the lightTo clean or replace grease filter Cleaning MethodRange Hood Care Troubleshooting Problem Possible Causes SolutionsWarranty

LI30KC/316902495 specifications

The Frigidaire LI30KC/316902495 is an innovative and efficient kitchen appliance designed to streamline meal preparation and enhance cooking convenience. With a combination of modern features and user-friendly design, it stands out in the crowded market of kitchen appliances.

One of the main features of the LI30KC is its powerful heating capabilities, allowing users to cook a variety of dishes quickly and effectively. The appliance offers multiple cooking modes, including broil, bake, and convection, ensuring that it can handle a diverse range of recipes. The convection feature is particularly noteworthy, as it circulates hot air throughout the cooking chamber, resulting in evenly cooked food with a deliciously crispy texture.

The built-in digital display and intuitive controls make operation simple for all users. Buttons are clearly labeled and easy to navigate, which minimizes the learning curve for those new to cooking. This thoughtful design means that users can prepare meals with confidence, whether they are experienced cooks or beginners.

Another significant characteristic of the Frigidaire LI30KC is its spacious interior. The appliance has ample cooking space, making it suitable for preparing large meals for family gatherings or entertaining guests. The adjustable racks provide versatility, allowing users to customize the internal layout to accommodate different dish sizes and shapes.

In terms of safety features, the LI30KC is equipped with an auto shut-off function, which ensures peace of mind during operation. This feature automatically turns off the appliance after a set period, preventing potential hazards from occurring if the user inadvertently forgets their meal.

Energy efficiency is also a key factor, with the LI30KC designed to consume less power compared to traditional ovens. This eco-friendly approach not only helps in reducing utility bills but also makes it a responsible choice for environmentally conscious consumers.

Overall, the Frigidaire LI30KC/316902495 is a versatile and reliable kitchen appliance that combines functionality with modern technology. Its diverse cooking options, generous capacity, user-friendly controls, and energy-efficient design make it an excellent addition to any kitchen, catering to a wide range of culinary needs. Whether you are baking, roasting, or broiling, this appliance is engineered to deliver optimal results every time, making meal preparation a delightful experience.