Frigidaire LI30KC/316902495 manual List of Materials Electrical Requirements

Page 5

LIST OF MATERIALS

Parts included in your hood

4 - 0.45 x 1.3 cm mounting screws

3¼” x 10” (8.3 x 25.4 cm) rectangular metal vent system.

NOTE: An optional 7” round duct kit is available. You can order this kit as part number 5304487139.

Parts Needed

2 - UL listed wire connectors

1 - 75W max, 120V incandescent light bulb

Wall or roof cap with damper to match vent system

Vent clamps/duct tape as required

UL listed or CSA approved ½” strain relief

Tools/Materials required

Drill

1¼” (3.0 cm) drill bit

⅛” (0.3 cm) drill bit for pilot holes

Pencil

Wire stripper or utility knife

Tape measure or ruler

Caulking gun and weatherproof caulking compound

Flat-blade screwdriver

Phillips screwdriver

Saber or keyhole saw

For cabinets with recessed bottoms:

Two 2” (5.1 cm) wide filler strips. Length and thickness determined by recess dimensions.

Four flat head wood screws or machine screws with washers and nuts (to attach filler strips).

LIST OF MATERIALS

ELECTRICAL REQUIREMENTS

Observe all governing codes and ordinances.

Ensure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70 (latest edition), or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. 0-M91 (latest edi- tion) and all local codes and ordinances.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, MA 02269

CSA International

8501 East Pleasant Valley Road

Cleveland, OH 44131-5575

A 120 volt, 60 Hz., AC only, 15-amp, fused electrical circuit is required.

If the house has aluminum wiring, follow the procedure below:

1.Connect a section of solid copper wire to the pigtail leads.

.Connect the aluminum wiring to the added section of copper wire using special co nectors and/or tools designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer’s recom- mended procedure. Aluminum/copper connection must conform with local codes and industry accepted wiring practices.

Wire sizes and connections must conform with the rating of the appliance as specified on the model/serial rating plate.

The model/serial plate is located on the left side of the range hood.

Wire sizes must conform to the requirements of the National Electrical Code, ANSI/NFPA 70 (la est edition), or CSA Standards C22. 1-94, Canad an Electrical Code, Part 1 and C22.2 No. 0-M91 (latest edition) and all local codes and ordinances.



Image 5
Contents USA Canada LI30KC May/13 Product Record and Registration Contents Read all instructions before using this appliance Important Safety InstructionsFire Department List of Materials Electrical Requirements List of MaterialsFor Mobile Home Installations Product DimensionsCabinet Dimensions Location RequirementsVenting Requirements Cold Weather InstallationsMakeup Air Venting MethodsPrepare the Location Determine Wiring Hole LocationTo wire through wall To wire through topWall Venting Style 1 Recirculating Hood versionInstall Vent System Install Range Hood Ducted versionDo not reconnect power until the installation is complete Installing the HoodPower Supply Cable Installation Complete Installation Installing the Hood Make Electrical ConnectionElectrical Shock Hazard Disconnect power before servicing Recirculation Vent Cover Range Hood USERange Hood Controls Operating the lightRange Hood Care Cleaning MethodTo clean or replace grease filter Problem Possible Causes Solutions TroubleshootingWarranty

LI30KC/316902495 specifications

The Frigidaire LI30KC/316902495 is an innovative and efficient kitchen appliance designed to streamline meal preparation and enhance cooking convenience. With a combination of modern features and user-friendly design, it stands out in the crowded market of kitchen appliances.

One of the main features of the LI30KC is its powerful heating capabilities, allowing users to cook a variety of dishes quickly and effectively. The appliance offers multiple cooking modes, including broil, bake, and convection, ensuring that it can handle a diverse range of recipes. The convection feature is particularly noteworthy, as it circulates hot air throughout the cooking chamber, resulting in evenly cooked food with a deliciously crispy texture.

The built-in digital display and intuitive controls make operation simple for all users. Buttons are clearly labeled and easy to navigate, which minimizes the learning curve for those new to cooking. This thoughtful design means that users can prepare meals with confidence, whether they are experienced cooks or beginners.

Another significant characteristic of the Frigidaire LI30KC is its spacious interior. The appliance has ample cooking space, making it suitable for preparing large meals for family gatherings or entertaining guests. The adjustable racks provide versatility, allowing users to customize the internal layout to accommodate different dish sizes and shapes.

In terms of safety features, the LI30KC is equipped with an auto shut-off function, which ensures peace of mind during operation. This feature automatically turns off the appliance after a set period, preventing potential hazards from occurring if the user inadvertently forgets their meal.

Energy efficiency is also a key factor, with the LI30KC designed to consume less power compared to traditional ovens. This eco-friendly approach not only helps in reducing utility bills but also makes it a responsible choice for environmentally conscious consumers.

Overall, the Frigidaire LI30KC/316902495 is a versatile and reliable kitchen appliance that combines functionality with modern technology. Its diverse cooking options, generous capacity, user-friendly controls, and energy-efficient design make it an excellent addition to any kitchen, catering to a wide range of culinary needs. Whether you are baking, roasting, or broiling, this appliance is engineered to deliver optimal results every time, making meal preparation a delightful experience.