Installing the Hood

Use ¹⁄8” (3 mm) drill bit and drill 4 pilot holes as shown. NOTE: Make the drill holes on the thin area of the slot.

A. Drill pilot hole

.Install the 4 - .45 cm x 1.3 cm mounting screws in pilot holes. Leave about ¼” (6.4 mm) space between screw heads and cabinet to slide range hood into place.

¹⁄4”

(6.4 mm)

Power Supply Cable Installation

1.For direct wire installations, run the home power supply cable according to the National Electric Code or CSA standards and local codes and ordinances. There must be enough wiring from the fused disconnect (or circuit breaker) box to make the connection in the hood electrical terminal box.

NOTE

Do not reconnect power until the installation is complete.

4.For roof installations, remove the top rectangular vent knockout. For wall installations, remove the rear rectangular vent knockout.

.Remove the screw from the terminal box cover. Remove terminal box cover and set aside.

A. Terminal box cover

B. Screw

A. Vertical connector	B
B. 3.5 x 9.5 mm screws
C. Vent knockouts
D. Horizontal connector

.Install the 3¼” x 10” (8.3 x 25.4 cm) vent connector. Attach to range hood with the .35 x .95 cm screws that you previously removed (step 1) and remove tape from damper flap.

NOTE

The 3¼” x 10” (8.3 x 25.4 cm) rectangular vent connector can be installed up to 1” (2.5 cm) on either side of the hood center to accommodate off center ductwork.

•If a vent damper is installed with a wall cap with damper, check that they do not interfere with each other. Remove the vent connector damper flap if they interfere.

.Remove the power supply knockout from the top or rear of the vent hood (depending on the incoming location of your home power supply cable) and install a UL listed or CSA approved ½” strain relief.

A. Power supply knockout

4.Using 2 or more people, lift the hood into final position. Feed enough electrical wire through the ½” UL listed or CSA approved strain relief to make connections in the terminal box. Tighten the strain relief screws.

.Position the range hood so that the large end of the keyhole slots are over the mounting screws.

Then push the hood toward the wall so that the screws are in the neck of the slots. Tighten the mounting screws, making sure the screws are in the narrow neck of slots.

.Connect ventwork to hood. Seal joints with vent clamps or duct tape to make secure and airtight.

.Check that back draft dampers work properly.

LI30KC/316902495 specifications

The Frigidaire LI30KC/316902495 is an innovative and efficient kitchen appliance designed to streamline meal preparation and enhance cooking convenience. With a combination of modern features and user-friendly design, it stands out in the crowded market of kitchen appliances.

One of the main features of the LI30KC is its powerful heating capabilities, allowing users to cook a variety of dishes quickly and effectively. The appliance offers multiple cooking modes, including broil, bake, and convection, ensuring that it can handle a diverse range of recipes. The convection feature is particularly noteworthy, as it circulates hot air throughout the cooking chamber, resulting in evenly cooked food with a deliciously crispy texture.

The built-in digital display and intuitive controls make operation simple for all users. Buttons are clearly labeled and easy to navigate, which minimizes the learning curve for those new to cooking. This thoughtful design means that users can prepare meals with confidence, whether they are experienced cooks or beginners.

Another significant characteristic of the Frigidaire LI30KC is its spacious interior. The appliance has ample cooking space, making it suitable for preparing large meals for family gatherings or entertaining guests. The adjustable racks provide versatility, allowing users to customize the internal layout to accommodate different dish sizes and shapes.

In terms of safety features, the LI30KC is equipped with an auto shut-off function, which ensures peace of mind during operation. This feature automatically turns off the appliance after a set period, preventing potential hazards from occurring if the user inadvertently forgets their meal.

Energy efficiency is also a key factor, with the LI30KC designed to consume less power compared to traditional ovens. This eco-friendly approach not only helps in reducing utility bills but also makes it a responsible choice for environmentally conscious consumers.

Overall, the Frigidaire LI30KC/316902495 is a versatile and reliable kitchen appliance that combines functionality with modern technology. Its diverse cooking options, generous capacity, user-friendly controls, and energy-efficient design make it an excellent addition to any kitchen, catering to a wide range of culinary needs. Whether you are baking, roasting, or broiling, this appliance is engineered to deliver optimal results every time, making meal preparation a delightful experience.