Roksan Audio L III user manual U T I O N S, AC Mains Supply, General Cautions

Page 3

 

C A U T I O N S

K a n d y Power Amplifier 2 Channel

 

 

 

AC MAINS SUPPLY

Your Kandy Power Amplifier is set to operate from a fixed supply voltage which is marked on a label next to the mains input plug. Before connecting the mains lead please check that your mains supply corresponds to this label as below:

230V Products

………………………………….Voltage Range: 220V – 240V

115V Products

………………………………….Voltage Range: 100V – 120V

The mains lead supplied with this product has an IEC mains socket that plugs into the IEC connector on the unit’s rear panel. The other end is normally attached to the appropriate mains plug for your country. In the UK this is the standard UK13A plug.

This plug should ordinarily not be removed from the lead. If you do remove it, please dispose of it safely so that it cannot be plugged into a mains socket whilst in a potentially dangerous condition. We suggest that you obtain from your dealer a complete replacement lead.

Should you move to another area where either the mains voltage or the mains plugs are different from those as supplied with your Power Amplifier, please contact the appointed ROKSAN distributor for assistance.

Please observe correct mains polarity at all times.

The Kandy Power Amplifier mains fuse is located on the rear panel next to the IEC mains connector. This must only be replaced by the fuse of the type and rating as described on the fuse rating label on the rear panel of the unit.

This product requires connection to electrical earth (ground). The earth wire (in the UK this is colour coded green/yellow) of the mains cable supplied with your Power Amplifier must be connected to a suitable grounding point established for this purpose by your electricity supply company. If you are in any doubt, consult a qualified electrician.

If the equipment is likely to be unused for some time, unplug it from the mains supply.

GENERAL CAUTIONS

FCC WARNING

This equipment may generate or use Radio Frequency energy. The user may lose the right to operate this equipment if unauthorised modifications are made.

INTERFERENCE

Properly installed, this unit should not cause harmful interference to radio communications, There is, however, no guarantee that such interference will not occur in a specific installation. If interference arises (which you can determine by switching the unit off and on) you could try to remedy matters by the following:

Re-orient or re-locate the receiving antenna

Increase the distance between the Kandy Power Amplifier and receiver

Connect the unit to a different mains circuit from that of the receiver

Consult your ROKSAN appointed dealer or an experienced Radio/TV technician for help and advice

LOCATION

Your Kandy Power Amplifier should be located in a well ventilated area and kept away from sources of heat, dust and humidity and from direct sunlight.

The Kandy Power Amplifier may be positioned either as a free standing unit or alongside another audio/video product.

Never place the Power Amplifier on carpet or any surface likely to hinder normal ventilation. Never allow liquids or other objects to fall into the unit.

This unit contains no user serviceable parts. Do Not remove any panels or attempt to service it yourself. Unauthorised servicing will void the warranty.

Roksan Audio ltd

Kandy Power Amplifier 2-Channel User Manual

CLASSIFICATION: General Use

Version 1.01

All specifications are liable to change without notice. E&OE

Page 3 of 10

ENGLISH

Image 3
Contents N d y EU Directives MaintenanceT R O D U C T I O N UnpackingU T I O N S AC Mains SupplyGeneral Cautions Roksan InstallationConnecting Mains Power Signal ConnectionsLoudspeaker Connections Set-up Trimmed Input Connection E R a T I O N Switching onGuarantee TroubleshootingT E S Specifications

L III specifications

The Roksan Audio L III is a high-fidelity loudspeaker designed to deliver exceptional sound quality, combining advanced engineering with elegant aesthetics. This speaker is a testament to Roksan's commitment to producing audio equipment that meets the needs of discerning audiophiles.

One of the main features of the L III is its sophisticated two-way design. It incorporates a 5-inch mid/bass driver and a 1-inch tweeter, which work together to create a balanced sound profile. The mid/bass driver is engineered using a lightweight, stiff cone material that enhances transient response and provides deep bass reproduction. The tweeter features a fine silk dome, ensuring smooth high-frequency response and remarkable detail without harshness.

The Roksan L III is built with a focus on acoustic efficiency. Its cabinet is meticulously constructed to minimize resonances, allowing for a more accurate soundstage. The internal bracing is strategically placed to provide additional support, reducing unwanted vibrations that can color the sound. The design of the cabinet also aids in controlling the bass response, resulting in a clean and articulate low-end.

Another hallmark of the L III is its versatile connectivity options, allowing it to integrate seamlessly into a variety of audio systems. The speakers can easily handle a wide range of amplifier powers, making them suitable for both small setups and more powerful systems. The impedance rating ensures compatibility with most amplifiers, providing users with greater flexibility in matching with their existing gear.

The speaker's aesthetic design is not to be overlooked. With a sleek and modern finish, the Roksan L III is available in various color options, allowing it to complement any home décor. The front grille can be easily removed, showcasing the beautiful driver design and adding to the speaker's visual appeal.

Roksan has also implemented advanced technologies in the L III to optimize performance. The speaker benefits from a proprietary crossover network that employs high-quality components, ensuring accurate frequency division and phase coherence. This results in a more natural sound representation, allowing listeners to experience their favorite music as intended by the artist.

In summary, the Roksan Audio L III is a remarkable loudspeaker that combines advanced technology, elegant design, and outstanding performance. With its carefully crafted drivers, robust construction, and versatile connectivity, it stands as a prime choice for those seeking a premium audio experience. Whether used for critical listening or casual enjoyment, the L III delivers sound that captivates and resonates with listeners.