Pelco MCC1300H-2, CCC1300H-2X Specifications, General Electrical, Bnc, Mechanical, Power Supplies

SPECIFICATIONS

GENERAL		ELECTRICAL
CCD Sensor:	1/3-inch interline transfer	Power Requirements
Picture Elements		CCC1300H-2,
CCC1300H-2,		MCC1300H-2:	24 VAC, 60 Hz
MCC1300H-2:	768H x 494V	CCC1300H-2X:	24 VAC, 50 Hz
	(approx. 380K)	Power Connector:	3-pin terminal strip,
CCC1300H-2X:	752H x 582V		push-in type
	(approx. 440K)	Video Connector:	BNC
Sensing Area:	3/16 x 1/8 - inch	Lens Jack:	4-pin connector
	(4.7 mm x 3.5 mm)		(miniature square)
Synchronize		Current Consumption
System:	AC Line lock	CCC1300H-2,
Horizontal Resolution		CCC1300H-2X:	240 mA
CCC1300H-2,		MCC1300H-2:	220 mA
CCC1300H-2X:	470 TV lines	MECHANICAL
MCC1300H-2:	560 TV lines
Iris Control:	Electronic/passive	Lens Mount:	C/CS mount (Pelco
Minimum			PCMA40 mount adapter
Illumination			is needed to attach
CCC1300H-2,			C-mount lens)
CCC1300H-2X:	1.5 lux at f1.2, 75%	Camera Mount:	1/4 x 20, top and bottom
	highlight reflectance,		of camera housing
	at 77° F (25° C)	POWER SUPPLIES
MCC1300H-2:	0.15 lux at f1.2, 75%
	highlight reflectance,	TF2000:	20 vA power supply,
	at 77° F (25° C)		24 VAC
Electronic Shutter Speed		MCS Series
Signal-to-Noise		Power Supply:	Power supply for up to
Ratio:	>48 dB (AGC off)		16 cameras, 24 VAC
Gain Control:	Automatic
Vertical Phase:	+66° +/-90°	(Design and product specifications subject to
Automatic Gain		change without notice.)
Control:	Selectable
Backlight
Compensation:	Selectable
Scanning System
CCC1300H-2,
MCC1300H-2:	525 lines, 2:1 interlace
CCC1300H-2X:	625 lines, 2:1 interlace
Signal Processing: DSP
Auto Iris Lens
Type:	DC/video control
Video Output:	1Vp-p, 75 ohms
Dimensions:	2.09 (W) x 2.17 (H) x
	2.21 (D) inches
	(53 x 55 x 56 mm)

Pelco Manual C1961M-B (3/01) 11