Frigidaire 318205307 Care & Cleaning, Removing and Replacing the Lift Off Oven Door

Page 25

Removing and Replacing the Lift-

Off Oven Door

CAUTION

The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.

To Remove Oven Door:

1.Open oven door completely (horizontal with floor -

See Figure 1).

2.Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Figure 2). A tool such as a small flat-blade screwdriver may be required.

3.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - See Figure 3).

4.Close the door to the broil stop position (the oven door will stop into this position just before fully closing).

5.With the oven door in the broil stop position, lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Figure 4).

To Replace Oven Door:

1.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - See Figure 3).

2.Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Figure 4). The hook of the hinge arms must be fully seated onto the roller pins.

3.Fully open the oven door (horizontal with floor - See

Figure 1).

4.Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges (See Figure 2) to the locked position.

5.Close the oven door.

Door Hinge locations

with oven door fully open

Care & Cleaning

Around

Oven door

 

Hinge

 

Figure 3

Figure 4

Special Door Care Instructions - Most oven doors contain glass that can break.

Read the following recommendations:

1.Do not close the oven door until all the oven racks are fully in place.

2.Do not hit the glass with pots, pans, or any other object.

3.Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.

Changing Oven Light

CAUTION

Be sure the oven is unplugged and all parts are COOL before replacing the oven light bulb. Do not turn the oven light on during a self-cleaning cycle. High temperature will reduce lamp life.

On some models an interior oven light will turn on automatically when the oven is opened. The oven light may be turned on when the door is closed by using the oven light switch located on the Electronic Oven control. The oven light bulb is covered with a glass shield held in place by a wire holder. THIS GLASS SHIELD MUST ALWAYS BE IN PLACE WHEN THE OVEN IS IN USE.

To Replace the Light Bulb:

CAUTION

BE SURE OVEN IS COOL

1.

Turn the power off at the main source.

2.

Wear a leather-faced glove for protection against

 

possible broken glass.

3.

Replace bulb with a 40 Watt appliance bulb only.

Figure 1

Figure 2

4. For self-cleaning oven, press wire holder to one side to

release glass shield, change bulb

and be sure to replace glass shield.

25

Image 25
Contents Use &Care Register Your Product Welcome & CongratulationsPlease Carefully read and save these instructions Definitions Important Safety InstructionsDo not Touch Interior Oven Elements or Important Safety Instructions for Using Your OvenImportant Safety Instructions for Cleaning Your Oven Features AT a GlanceYour Electric Wall Oven Features At a GlanceOven Vent Location Before Setting Oven ControlsAir Circulation in the Oven Arranging Oven RacksTypes of Oven Racks Control Pad Features Before Setting Oven controlsTemperature Visual Display Function follow later in this Use & Care GuideMinimum and Maximum Control Pad Settings Setting Oven controlsSetting the Clock Feature Minimum TEMP. /TIME Maximum TEMP. /TIMESetting Temperature Display Fahrenheit or Celsius Setting Continuous Bake or 6 Hour Energy SavingSetting Silent Control Operation Setting Add 1 Minute Feature Setting Minute TimerSetting Oven Lockout Feature Setting Bake Setting Powerplustm PreheatTo set the Preheat temperature for 375F To set the Bake Temperature to 375FSetting Convection Bake Setting Oven ControlsConvection Baking Tips Air circulation during Convection BakeSetting Convection Roast Setting Convection ConvertTo set a Convection Roast Temperature of 375F Convection Roasting TipsTo set a Convection Broil Temperature of 500F Setting Convection BroilConvection Broiling Tips Electric Oven Convection Broiling Table RecommendationsSetting Delay Start Setting Bake TimeWhen the timed bake finishes BAKE, Convect BAKE, Bake Time and DelayCancel Setting BroilBroiling Tips Electric Oven Broiling Table RecommendationsSetting Pizza Setting Chicken NuggetsSetting MY Favorite Setting Keep WarmDelayed Bake Time Setting Oven Controls To adjust the oven temperature higher Adjusting Oven TemperatureTo adjust the oven temperature lower Oven lightSELF-CLEANING SELF-CLEANINGAdhere to the following cleaning precautions What to Expect during CleaningWhen the Self-Clean Cycle is Completed Setting SELF-CLEAN Cycle Time LengthStopping or Interrupting a Self-Cleaning Cycle Cleaning Various Parts of Your Range Care & CleaningRemoving and Replacing the Lift Off Oven Door Care & CleaningChanging Oven Light Be Sure Oven is CoolOven Baking Baking Problems and Solutions ChartOccurrence Possible CAUSE/SOLUTION Exclusions This warranty does not cover the following Major Appliance WarrantyDisclaimer of Implies Warranties Limitation of Remedies

318205307 specifications

The Frigidaire 318205307 is a versatile and reliable appliance part designed for use in various Frigidaire ranges and ovens. As a crucial component, this part exemplifies Frigidaire's commitment to quality and performance, ensuring that home chefs can achieve optimal results in their cooking endeavors.

One of the standout features of the Frigidaire 318205307 is its robust construction. Manufactured with high-quality materials, this part is built to withstand the rigors of daily use, providing durability and longevity. Designed specifically for compatibility with a range of Frigidaire models, it facilitates easy installation and replacement, making it accessible for DIY enthusiasts and professionals alike.

In terms of technology, the Frigidaire 318205307 incorporates innovative design elements that enhance its functionality. The part is engineered to provide precise temperature control, ensuring even cooking and baking results. This feature is particularly beneficial for those who take baking or roasting seriously, as it minimizes the risk of undercooking or overcooking dishes. Furthermore, the part contributes to efficient heat distribution, promoting consistency in meal preparation.

Another significant characteristic of the Frigidaire 318205307 is its user-friendly design. The part typically includes features that enhance the cooking experience, such as easy-to-read markings or indicators, which help users monitor cooking times and settings accurately. Additionally, its intuitive design means less hassle during installation and operation, allowing users to focus on what truly matters: preparing delicious meals.

Moreover, the Frigidaire 318205307 aligns with consumer trends towards energy efficiency and sustainability. By ensuring that ovens operate at peak performance, the part helps to optimize energy usage, contributing to lower utility bills while being environmentally friendly. This aligns well with the growing demand for home appliances that not only perform well but also leave a smaller carbon footprint.

Overall, the Frigidaire 318205307 is more than just a replacement part; it represents a blend of durability, precision, and user-centric design. Whether you are a casual cook or a culinary enthusiast, this part enhances the functionality of your Frigidaire range, ensuring reliable performance and satisfactory results for all your cooking needs.