Frigidaire GLASS DOOR REFRIGERATOR Routine Maintenance, Energy Conservation Measures

Page 7

NSF Certified Temperature Gauge

This appliance is equipped with an NSF certified temperature gauge to display cabinet internal temperature. The temperature gauge is located on the top right side of the evaporator housing inside the unit.

Fluorescent Lamp (Glass Door Models)

The Glass Door Refrigerator is equipped with a 17 watt fluorescent lamp. A ballast – lamp mismatch may result in poor or no lighting.

If the lamp fails, replace with a lamp of the same type and wattage. Also, replace a lamp that flickers continuously. This could damage the ballast.

Turning the light off, when not in use, will save energy. However, frequent ON-OFF cycling will reduce the lamp life.

Use only NSF certified lamp which can be ordered from your Frigidaire Commercial Service Center by calling 1-866-738-1640.

Interior Light (Stainless Steel Door Models)

The Stainless Steel Door models are equipped with a 40 watt bulb that lights up when the door is opened. If the bulb goes bad, replace with bulb of the same type and wattage. This is a special bulb with a shatterproof coating. Use only an NSF certified bulb of the same type and wattage which can be ordered from your Frigidaire Commercial Service Center by calling 1-866-738- 1640.

Other Features

NSF Certified top mounted evaporator.

2 ½ thick urethane foam cabinet insulation.

Torsion spring door closer (Glass Door models).

Stainless steel evaporator housing.

Removable stainless steel drain cover.

Heavy duty front grill.

Heavy duty commercially rated electrical harness.

Heavy duty removable stainless steel shelf supports.

Routine Maintenance

Cleaning the Interior

Be sure to turn the temperature control to “OFF” and unplug the electrical cord. Wash the inside surface of the storage area with warm water and baking soda solution (about one tablespoon of baking soda per quart of warm water). Rinse thoroughly with clean, warm water and wipe dry.

Cleaning the Exterior

Wipe the cabinet exterior occasionally with a cloth dampened in mild detergent and water. Rinse and wipe dry with a soft cloth. Do not use razor blades or other sharp instruments that can

scratch the appliance surface when removing adhesive labels. Any glue left from the tape can be removed with a mixture of warm water and mild detergent or touch the residue with the sticky side of tape already removed. DO NOT REMOVE THE SERIAL PLATE.

Condensate Pan

Some models have a condensate pan in a fixed position located behind the toe grill. This must not be removed from under the cabinet. If the pan is removed, condensate will drop onto the floor.

POWER FAILURE

DO NOT open the appliance lid unnecessarily if the appliance is off for several hours.

If a power failure occurs, pack seven or eight pounds of dry ice into the appliance every 24 hours. Look in the Yellow Pages under “Dry Ice”, “Dairies”, or “Ice Cream Manufacturers” for local dry ice suppliers. Always wear gloves and use caution when handling dry ice.

Energy Conservation Measures

This appliance is designed for efficiency with heavy foam insulation. However, there are things that the user can do to maintain the appliance in operating condition.

Do not operate the appliance any colder than necessary to maintain safe, product storage temperatures.

Make sure the appliance is located to prevent direct exposure to sunlight, air ducts, etc.

Keep the door closed except for normal use. Inspect the door often to see that it self-closes and the gaskets are in good condition.

Do not overstock the product in the cabinet because it will block the normal air flow.

Have at least annual inspections by a qualified service company to see that the refrigerant charge is correct.

This appliance operates more efficiently in a cooler ambient than in a hot ambient. Try to maintain an ambient below 80ºF (27ºC) and 65% RH (Relative Humidity) for maximum efficiency.

Periods of Non-use and Moving Tips

Leave the appliance operating during periods of non-use of less than three (3) weeks.

Long Periods of Non-use

If the appliance will not be used for several months:

Remove all food and unplug the power cord.

Clean and dry the interior thoroughly.

Leave the appliance door open slightly, blocking it open if necessary, to prevent odor and mold growth.

Moving

When moving the appliance , follow these guidelines to prevent damage:

Disconnect the power cord plug from the wall outlet.

Remove foods, then defrost, and clean the appliance .

Secure all loose items such as base panel, baskets, and shelves by taping them securely in place to prevent damage.

In the moving vehicle, secure appliance in an upright position to prevent movement. Also, protect outside of appliance with a blanket or similar item.

7

Image 7
Contents Frigidaire Product Registration Important Safety InstructionsTools Needed Other PrecautionsParts and Accessories Electrical InformationRear Swivel Caster Installation Front Fixed Caster InstallationCaster Rail Installation Caster Installation and SET-UP NON-GLASS Door Appliance Start-up FeaturesEnergy Conservation Measures Routine MaintenanceGuide Water / Moisture / Frost Inside Appliance Important Safety Notice Disclaimer of Implied Warranties Limitation of Remedies Commercial Appliance Warranty Information

GLASS DOOR REFRIGERATOR specifications

The Frigidaire Glass Door Refrigerator is a modern and innovative appliance that combines style and functionality, making it an excellent choice for both commercial and home use. This refrigerator features a sleek glass door design, offering a clear view of its contents while enhancing the aesthetic appeal of any space. With its emphasis on performance and efficiency, the Frigidaire Glass Door Refrigerator stands out as a preferred option for those seeking both practicality and elegance.

One of the main features of the Frigidaire Glass Door Refrigerator is its energy-efficient operation. Equipped with an advanced cooling system, this model maintains ideal temperatures, ensuring that food and beverages are stored at their freshest. The refrigerator's energy-saving technology not only helps to reduce electricity bills but also contributes to a more sustainable environment.

Among its notable technologies, the Frigidaire Glass Door Refrigerator includes an auto-defrost feature that eliminates the hassle of manual defrosting. This technology ensures that frost buildup is minimized, maintaining optimal cooling performance while allowing for easy maintenance. Additionally, the adjustable shelving allows users to customize the interior layout according to their storage needs, accommodating various sizes of items from towering soda bottles to wide platters.

The design of the refrigerator incorporates bright LED lighting, illuminating the interior while consuming less energy than traditional bulb lighting. This feature not only enhances visibility but also adds a modern touch to the overall look of the appliance. The glass doors are engineered with tempered glass, offering durability and security while maintaining an attractive appearance.

Furthermore, the Frigidaire Glass Door Refrigerator is equipped with a reliable temperature management system that ensures consistent cooling performance, even during busy hours. The unit operates quietly, allowing it to fit seamlessly into any environment without causing disruptions.

In summary, the Frigidaire Glass Door Refrigerator is a stylish and efficient appliance that features energy-saving technologies, customizable storage options, and advanced cooling systems. Its tempered glass design not only elevates the aesthetic of your space but also provides convenience and easy access to stored items, making it an appealing choice for homeowners and businesses alike. With this refrigerator, users can enjoy freshness, performance, and a modern touch in their kitchens or commercial settings.