ELECTRIC COOKTOP INSTALLATION INSTRUCTIONS
Overhead Cabinet Should Not Exceed a Maximum Depth of 13" (33 cm)
A Min.
30" (76.2 cm) Min. Clearance Between the Top of the Cooking Platform and the Bottom of an Unprotected Wood or Metal Cabinet
24" (61 cm) Min. when Bottom of Wood or Metal Cabinet
is Protected by Not Less Than 1/8" Flame Retardant Millboard Covered With Not Less Than No. 28 MGS Sheet Steel, 0.015" (0.4 mm) Stainless Steel, 0.024"
(0.6 mm) Aluminum or 0.020" (0.5 mm) Copper
K Min. Recommended Distance Between Rear Edge of
Cutout and Nearest 10" Combustible Surface ( 25.4 cm) Above Countertop
18"F
(45.7 cm)
H
G
|
| J Min. From |
|
| Edge of |
|
| Cooktop |
24" | 12" | to Nearest |
(30.5 cm) | Combustible | |
(61 cm) |
| Wall (Either |
Side of Unit).
2 1/2" (6.4 cm) Min. From Edge of Cutout to Front Edge of Countertop
Approximate Location
of Junction Box
For a drawer installation below the cooktop, allow 8"(20.4cm) of clearance underneath the countertop. The drawer must not interfere with the electrical installation of the cooktop or contain
Letters on this figure refer to chart on front page except for J & K.
flammable materials.
CAUTION To eliminate the risk of burns
or fire resulting from reaching over heated surfaces, cabinet storage space located above the cooktop should be avoided. If cabinet storage is provided, risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets.
Model | J | K |
30’’ Ceramic Glass | 7 ½’’ (19.1 cm) | 2’’ (5.1 cm) |
36’’ Ceramic Glass | 7 ½’’ (19.1 cm) | 2’’ (5.1 cm) |
Figure 2 – COUNTERTOP CUTOUT OPENING
2