ELECTRIC COOKTOP INSTALLATION INSTRUCTIONS
Important Notes to the Installer
1.Read all instructions contained in these installation instructions before installing the appliance.
2.Remove all packing material before connecting the electrical supply to the appliance.
3.Observe all governing codes and ordinances.
4.Be sure to leave these instructions with the consumer.
Important Note to the Consumer
Keep these instructions with your Owner's Guide for the local electrical inspector's use and future reference.
IMPORTANT SAFETY INSTRUCTIONS
•Be sure your cooktop is installed and grounded properly by a qualified installer or service technician.
•These cooktops must be electrically grounded in accordance with local codes or, in their absence, with the National Electrical Code ANSI/NFPA No.
WARNING The electrical power to the cooktop must be shut off while line connections are being made. Failure to do so could result in serious injury or death.
Provide Electrical Connection
Install the junction box under the cabinet and run 120/240 or 120/208 Volt, AC wire from the main circuit panel. NOTE: DO NOT connect the wire to the circuit panel at this time. Wait until all wires have been connected in the junction box.
Electrical Requirements
Observe all governing codes and local ordinances.
1.A
DO NOT fuse neutral.
NOTE: Wire sizes and connections must conform with the fuse size and rating of the appliance in accordance with the National Electrical Code ANSI/NFPA No. 70– latest edition, or with CSA standard C22.1, Canadian Electrical Code, Part 1, and local local codes and ordinances.
WARNING An extension cord must not be used with this appliance. Such use may result in a fire, electrical shock, or other personal injury.
2.The appliance should be connected to the fused disconnect (or circuit breaker) box through flexible armored or nonmetallic sheathed cable. The flexible armored cable extending from this appliance should be connected directly to the grounded junction box. The junction box should be located as shown in Figure 2 with as much slack as possible remaining in the cable between the box and the appliance, so it can be moved if servicing is ever necessary.
3.A suitable strain relief must be provided to attach the flexible armored cable to the junction box.
Unpacking Instructions
Figure 3
1.Leave corner supports on cooktop until completion of Electrical Connection.
2.Be sure the bottle of cleaner conditioner packed in the literature bag is left where the user can find it easily. It is important that the
Model and Serial Number Location
The serial plate is located under the cooktop.
When ordering parts for or making inquires about your cooktop, always be sure to include the model and serial numbers and a lot number or letter from the serial plate
on your cooktop.
3