Frigidaire 750 Series, 740 Series warranty Sanitize Option, Wash

Operating Instructions (continued)

Wash Cycle Selections

Note: Cycle times are approximate and will vary with options selected.

Cycle Chart

Cycle	Description	To Select Cycle	Water		Time	Washes/
			(approx.)		(approx.)	Rinses
Pots &	For pots, pans,	• Turn dial to POTS & PANS/HEAVY	7.2	gal.	84 min.*	2 washes
Pans	casseroles, and	WASH.	6.0	imp. gal.		4 rinses
	dinnerware with dried-	• Select HI-TEMP WASH ON option.	27.3	liters
	on or baked-on soils.	• Select other desired OPTIONS.
Heavy	For heavily soiled	• Turn dial to POTS & PANS/HEAVY	7.2	gal.	84 min.*	2 washes
Wash	dishes and silverware.	WASH.	6.0	imp. gal.		4 rinses
		• Select desired OPTIONS.	27.3	liters
Normal	For regularly soiled	• Turn dial to NORMAL WASH.	6.0	gal.	78 min.*	2 washes
Wash	dishes and silverware.	• Select desired OPTIONS.	5.0	imp. gal.		3 rinses
			22.7	liters
Short	For lightly soiled or	• Turn dial to SHORT WASH.	4.8	gal.	71 min.*	1 wash
Wash	pre-rinsed dishes and	• Select desired OPTIONS.	4.0	imp. gal.		3 rinses
	silverware.		18.2	liters
Rinse/	For rinsing dishes that	• DO NOT USE detergent.	1.2	gal.	12 min.	1 rinse
Hold	will be washed later.	• Turn dial to RINSE/HOLD.	1.0	imp. gal.
		• Select SANITIZE OFF and HEAT	4.5	liters
		DRY OFF.
					* Includes dry time.

Energy Options

750 Series

Hi-Temp Wash Option

When HI-TEMP WASH ON option is selected, the dishwasher heats the water in the main wash to approximately 140°F (60°C). Wash action will continue but timer will not advance until proper temperature is reached. The hotter water provided by this option helps activate dishwasher detergent to clean food grease and soil from dishes. HI-TEMP WASH ON option can be used with any cycle except

RINSE/HOLD.

To turn off option, select HI-TEMP WASH OFF.

Sanitize Option

To sanitize your dishes and glassware, select the SANITIZE ON option. The water temperature in the final rinse will be raised to 155°F (68°C) and will maintain that temperature for 9 minutes. This option is available in Pots & Pans, Heavy, Normal and Short cycles. The cycle time will be extended until the proper water temperature is reached. Washing action will continue during the water heating delay. For best results, the incoming water temperature should be at least 120°F (49°C).

The sanitize criteria may not be satisfied if there is an interruption of the cycle, power failure, or if the incoming water temperature is below 120°F (49°C).

Heat Dry Option

HEAT DRY ON option provides faster drying since the heating element is on during the drying portion of cycle.

HEAT DRY OFF option saves electricity since the heating element is off during the drying portion of cycle. To speed drying process, open the door slightly after the cycle is complete. Some water droplets may remain on door and tub and in areas where dishes touch silverware basket and rack.

With either option, you may see water vapor coming from vent during drying portion of cycle. The vent is closed during washing to hold moisture and sound inside and then opens for drying.

The drying option may be changed at any time during the cycle and affects only the drying period.

7