Electrolux ES510L manual Adjusting Your Oven Temperature, When the Self-Clean cycle is done

Self-Cleaning

INSTRUCTIONS PRESS DISPLAY

When the Self-Clean cycle is done:

1.The time of day,"DOOR LOCKED" and "CLEAN" icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened.

Stopping or Interrupting a Self-Cleaning cycle:

If it becomes necessary to stop or interrupt a Self-Cleaning cycle due to excessive smoke or fire in the oven:

1.	Press	.
2.	Once the oven has cooled down for approximately 1 HOUR and
	the "DOOR LOCKED" icon is no longer displayed,the oven door
			Fig.7
	can then be opened (Fig. 7).

Adjusting Your Oven Temperature

The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.

INSTRUCTIONSPRESS

To adjust the oven temperature higher:

1. Press for 6 seconds (Fig. 1).

2. To increase the temperature use the number pads to enter the

desired change. (Example 30°F) (Fig. 2). The temperature may be increased as much as 35°F (19°C).

3. Press to accept the temperature change and the display

will return to the time of day (Fig. 3). Press to reject the change if necessary.

To adjust the oven temperature lower:

1. Press for 6 seconds (Fig. 4).

2.To decrease the temperature use the number pads to enter the

desired change. (Example -30°F) and then press

(Fig. 5). The temperature may be decreased as much as 35°F (19°C).

3. Press to accept the temperature change and the display

will return to the time of day (Fig. 6). Press to reject the change if necessary.

Note: The oven temperature adjustments made with this feature will not change the Self-Clean cycle temperature.

25

DISPLAY

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6