42Care and Cleaning
Aluminum foil and oven liners
Do not use oven bottom liners or use aluminum foil to cover the oven racks.
CAUTION
Protective
Using a liner in the oven restricts the heat and air flow needed to obtain the best possible cooking results for any oven.
During
Changing the oven light
CAUTION
Be sure the range is unplugged and all parts are COOL before replacing oven light. Wear a leather glove for protection against possible broken glass or burns.
The oven lights are located at the rear of the oven cavity and are covered with a glass shield held by a wire holder (Figure 1). The glass shield protects the light bulb and must be in place whenever the oven is in use.
glass |
shield |
wire |
holder |
Fig. 1
To replace interior oven light bulb:
1.Turn electrical power off at the main source or unplug the range.
2.Press wire holder to one side to release the glass shield that covers the light bulb.
3.Replace light with a new 40 watt appliance bulb.
4.Replace glass shield over bulb and snap wire holder back into place.
5.Turn power on at main source (or plug the appliance in).
6.The clock will then need to be reset. To reset, see Setting clock in this Use & Care Guide.