Electrolux EI30EC45KB manual Setting the clock Changing clock display mode, To set the clock for

20Setting Oven Controls

Setting the clock Changing clock display mode

When the appliance is powered up for the first time or when the electric supply to the appliance has been interrupted, the display will flash "12:00" (Figure 1).

Fig. 1

To set the clock for 1:30:

Example

Step			Press
1.	Press set clock.
2.	Enter 130 using the	numeric	130
	keypad.
3.	Press START to accept.

NOTES

•Be sure to set the clock with the correct time of day before using the oven, especially cooking with added time instructions.

•The clock cannot be adjusted when the oven is cooking, when the timer is active or during self-clean.

•If an invalid time of day is entered, the control will sound a triple beep (error tone). Re-enter a valid time of day and press START. If CANCEL is pressed the clock will set for 12:00.

The oven control is factory preset to display the time of day with a 12-hour clock setting. The display can be changed to provide the time of day using a 24-hour clock display or the clock display may be turned OFF.

When the clock display is turned OFF, the clock continues to run in the background on the previously chosen 12-hour or 24-hour mode.

To change clock display modes:

Example

Step Press

1. Press and hold set clock for 6 seconds.

2. Press set clock to toggle between "12 Hr dAY", "24 Hr dAY" or "CLO OFF" display choices. Release keypad when the desired mode appears (Figures 1, 2 and 3).

3. Press START to accept.

Fig. 1 Fig. 2

Fig. 3

NOTE

•The clock display mode cannot be modified when the oven is active with any cooking function or during self-clean.