Electrolux EKM11440CN, EKM11440KN manual Connecting the electricity supply

Page 32

Installing Your Cooker

Connecting the electricity supply

Warning: This appliance must be earthed!

This appliance must be fitted using a double pole unit of 30 ampere minimum capacity with 3mm minimum contact at all poles.

Access to the mains terminal is gained by opening the terminal block cover at the rear of the appliance - use a flat bladed screw driver for this.

Connection should be made with a 6.0mm2 twin and earth cable.

First strip the wires. then push the cable through the cable clamping the terminal block cover.

Connect the cable to the terminal block and tighten the cable clamp screw - see diagram.

Close the terminal box, ensuring that the cover is engaged on the locking tabs.

Sufficient cable should be used to allow the cooker to be pulled out, but must hang clear of the floor so it does not become twisted or trapped when the cooker is pushed back.

Please ensure that the user has this copy of the handbook, and the appliance is in place. Thank you.

Live

1

 

(Red or Brown)

2

 

Neutral

3

4

(Black or Blue)

 

 

5

Earth

 

(Green / Yellow

 

or sleeving)

 

Cable

 

clamp

 

29

Image 32
Contents Page Page Contents About Your Cooker Before Using Your Cooker Hob & Cooker Safety Aluminium foilEnergy Saving Using Your Gas HobHob Ignition Using the griddle Using Your GriddleBefore using the griddle for the first time Using Your Ceramic Hob Switching on rotary controlAbout your hob Hot hob lightUsing Your Grill Using Your Main Oven Switching on the fan ovenSwitching on the conventional oven Fan Oven Guide Oven and bakeware Cooking GuidePre-heating Roasting Guide Roast turkey Trouble-shooting Fruit Cakes General Baking GuideUsing The Programmer/Clock Setting the time of daySetting an alarm tone Programmer buttonsEnd Time method Setting the minute minderSemi Automatic Cooking The Duration method Setting the Programmer Set the temperature of the oven and place the food insideWhen using the Programmer Fully Automatic CookingCleaning your Ovens Cleaning the oven cavitiesChrome plated parts Pristine enamel surfacesCleaning your Gas Hob Cleaning Your Electric Hob Glass parts Cleaning your ApplianceEnamel surfaces & parts Before you call Ignition won’t workThere is condensation on DoorsPlease remember that bulbs are not covered by your warranty Changing Light BulbsInstalling Your Cooker Before you startClearances Ventilation Requirements UK Regulations & Standards Plinth Cover Your stability bracketLevelling Connecting the electricity supply Connecting to the gas supply HobGrill OvenTechnical Data Notes Fuel Type Hotplate Burner KW Rating Element Page Page Contact Us 0870 444